Other Content
ALARM ORIGINATION QUICK FIND® FEATURE: During or following an alarm, it
may be diicult to determine which alarm initiated an alarm event. This patented
Quick Find® feature will immediately allow you to locate the originating alarm
once the alarms have stopped sounding.
1. Press and hold the Test/Silence button on any alarm until the
test sequence on this alarm begins. Release the test button.
2. Once this test sequence ends, the originating alarm continues
to sound for approximately 60 seconds, which provides ample
time to locate the originating alarm.
3. Remember to reset the originating alarm in order to clear the
Quick Find® alarm origination and to return your system to
normal operation.
4. To reset alarm origination, press and hold the test button on
any alarm for approximately 10-15 seconds. Reset aer each
alarm event. The reset feature will reset all interconnected
alarms and return the system to normal operation.
Alarm Origination & Location Feature
®
What It Does
How To Use It
TEST/SILENCE
BUTTON
RESET
BUTTON
These are the same
buttons used for both
functions
® 2018 USI Electric, Inc. | CM332 | 082018
USIELECTRIC.COM