Specifications
33
URC 2015 Total Control Product Catalog
Vivido™ Lamp Dimming and Appliance Switching Plug-In Modules
Simply plug the lamp cord into the receptacle on the Vivido Lamp Dimmer and
plug the Lamp Dimmer into the wall. No screwdriver needed. The Vivido Plug-
in Lamp Dimming Module provides local and remote ON/OFF/DIM/BRIGHT
control of table and oor lamps where desired. Furthermore, the module
provides other programmable funcons (scenes, events, associaon, child
lockout, etc.) when installed as part of a Total Control system. Plug-in modules
can be manually controlled and remotely controlled by commands sent from
URC and other Z-Wave compable controllers or programs.
The Vivido Plug-in Appliance Switching Module plugs directly into the
wall. Any device up to 600 Was, including appliances, then plugs into the
Switching Module.
Common Key Features
• Quiet relay switching
• Amber LED indicates ON/OFF load status
• Single buon programming
• Can be included in Scenes
• Ability to be controlled remotely by other Vivido devices through associaon
• Can be associated with up to ve other devices
• Child Lockout feature
• Panic mode for increased security & integraon with security systems
• All-On/All-O inclusion
• Patented indicator system alerts if module is not set up on the network
• Congurable “Power On Status”
• Power failure memory
• Available in White only
Plug-in Lamp Dimming Module Key Features
• Provides polarized 300W-120VAC NEMA
• Electro-mechanical push buon located on side of device for inclusion and
ON/OFF/ DIM/BRIGHT operaon
• Adjustable ramp rate (up to 4 minutes)
Plug-in Appliance Dimming Module Key Features
• Provides 120V/AC NEMA 5-15R grounding receptacle for use with a wide
variety of appliances
• Electro-mechanical push buon located on side of device for inclusion and
ON/OFF operaon