Owner`s manual

Page 17
MRX-20 ADVANCED NETWORK SYSTEM CONTROLLER
Initial View (Room Monitoring)
When the Rooms Menu opens up, the room list populates with all
of the rooms in the Total Control project. Each room displays its
status so the user can visually see what is “going on” in that room.
Selecting a Room (Room Control)
Selecting any room from the room list will allow the MRX-20 to
control that room, as if it were physically in that room.
Returning the MRX-20 to control the room where it is physically
located requires accessing the Rooms Menu and selecting the
appropriate room.