Owner`s manual

Page 15
MRX-20 ADVANCED NETWORK SYSTEM CONTROLLER
Status Bar
The Status Bar, located at the bottom of the screen, provides
valuable status and feedback of the Total Control system. The four
sections of the Status Bar are determined by the system programmer.
Sunrise Time: Updated at midnight every day, this shows the sunrise
time for the next day.
Sunset Time: Updated at midnight every day, this shows the
sunset time for the next day.
URC Thermostat Temperature: If a THZ-100 (URC’s thermostat) is
included in your home, this shows the current temperature status
based upon the internal sensor, optional wired sensor, or the
average temperature of both.
Alarm Clock: If the room being controlled has an Alarm that is set
to activate for that room the status bar displays an alarm clock icon
and the next scheduled time/day.
Surround Mode: When used with URC’s DMS-AV Surround
Processor this displays the current surround mode of the processor.
Room Linked Status: Whenever the chosen room/area is “linked” to
other rooms, this shows a link acknowledgment and icon.
Weather Alerts: Based on the current location entered by the system
programmer, the words “Weather Alert” appears if an automatic
alert is received via the Internet.
Vacation Mode: Whenever the Vacation Mode is activated for the
Total Control system, the status bar displays “Vacation Mode: ON”.