Owner`s manual

TRF-ZW1 EXTENDER

Installation

 Connect the supplied Ethernet cable to the TRF-ZW1’s

network port and to an open connection port on your router

or network switch.

 Connect the 12V power adapter to the TRF-ZW1’s power port

and plug into an electrical outlet.

 The LED indicators, Power, Ready and Network illuminate

when powered. Wait for the LEDs to remain lit; this may take

up to 2 minutes. When the lights are solid, the TRF-ZW1 is

properly connected to the network.

 Open a browser and type in https://urc.mios.com.

 Create an account for access to the TRF-ZW1 Dashboard. The

online interface will discover the TRF-ZW1 and open its

Dashboard. Refer to the TRF-ZW1 Dashboard and Account

Setup section for further details.