Specifications

Ringing in Series I peripherals 2-7
DMS-100 Family DMS-100 Ringing System BASE15 and up
Figure 2-4 Takeover configurations in LM/RLM
Ringing take back
If the fault clears, the DMS-100 CC sends a take back command to the LM,
instructing the LM/RLM to restore the normal ringing configuration.
SSttaattee22
Bay 0 takes over Bay 1. RG 1 (Bay 1) is in-service
SP
Bay 0
RGI card
Bay–0
SP Bay 1
RGI card
Bay-1
RG 0
in-service
ToR–MUX in LD0 – LD18 (19)
RG 0
not in use
RG 1
in-service
ToR–MUX in LD0 – LD18 (19)
SP Bay 0
RGI card
Bay–0
SP
Bay 1
RGI card
Bay–1
ToR–MUX in LD0 – LD18 (19) To R–MUX in LD0 – LD18 (19)
NOT IN USE
SSttaattee33
Bay 0 takes over Bay 1. RG 0 (Bay 1) is in-service
RG 0
not in use
RG 1
in-service
RG 0
in-service
RG 1
not in use
RG 0
not in use
RGI
1
RGI
0
RGI
1
RGI
0
RGI
1
RGI
0
RGI
1
RGI
0
NOT IN USE