Specifications

Universal RCP – Operation Manual
V3.1
Page 6
22/12/11
Next is a menu to allow adjustment of the contrast of the LCD
display. This can vary in different ambient temperatures and can be
adjusted as necessary here.
The ‘Warn Beep’ function can be turned on or off if it becomes
annoying! When a button is pressed for some function which is not
available for a particular camera model there will be warning screen
displayed for a few seconds accompanied by a ‘beep’ if it is enabled
in this menu.
The final Setup Menu (shown by the fact that the right hand menu
select button is not lit) provides the settings for 3D modes and
Keypad operation of RCP operation.
The choices for 3D are ‘Non 3D’, ‘1x3D’ and ‘2x3D’.
Non 3D provides for six normal individual channels. 1x3D sets up
channel buttons 1,2 & 3 as a single 3D system. 2 x 3D sets up all six
channel buttons to provide 2 complete 3D control systems for four
cameras. See the section later in the manual for a full description of
3D operation.
The ‘Keypad’ on/off mode switches the RCP from being controlled by
the six camera select buttons, to being controlled by a Camera Corps
Keypad unit. This increases the number of channels from six to ninety
six. See later in the manual for a full description of this feature.
Main Menus
The Main menus are accessed by pressing the left hand function adjust button from the Home Menu.
These menus provide control of all the most frequently used camera functions such as gain, shutter etc.
The list shown here comprises all of the possible menus available in the RCP, but those displayed at any
given time will depend on the make/model of camera selected.
Filter ND
Controls selection of camera ND Filter wheel positions.
Filter CC
Controls selection of camera colour filter wheel positions.
Gain
Selects master gain values. Step values depend on camera make/model.
Shutter
Sets shutter values.
Detail
Adjusts overall detail or sharpness setting. Note that other detail adjustments may be available in the Eng
menus, or by using the On Screen Display system where cameras have those available.
Chroma
Adjusts the overall camera picture saturation level.
MENU
SELECT
FUNCTION ADJUST
M A S T E R S E T U P
C h a n n e l 1 I D 1
C o n t r a s t W a r n B e e p
8 E n a b l e d
MENU
SELECT
FUNCTION ADJUST
M A S T E R S E T U P
C h a n n e l 1 I D 1
3 D S e t u p K e y p a d
Non 3D O f f