Specifications

Universal RCP – Operation Manual
V3.1
Page 23
22/12/11
RCP - Specifications
Channels
Six camera control channels may be set to control either six individual cameras, or 1 x 3D rig (two
cameras) + 3 individual cameras, or 2 x 3D rigs (four cameras).
In individual control mode all six cameras may be different makes/models.
In 3D control mode each 3D channel may have different camera types for each rig.
Standard or Multi-camera ID’s may be assigned to any channel button either in individual or 3D modes.
In Multi-Camera Keypad mode up to 6 groups of 16 cameras each may be stored with two alternative
setups. These setups can be toggled for a complete group of cameras using a single button press.
Software controlled functions
Audio Data output level
LCD Contrast
Data Baud Rate
Camera functions including:- ND Filters, Colour Filters, Gain, Shutter, Detail, Chroma, IR, AWC Modes,
Gamma, Knee, Peak/Average, Iris Area, Iris Speed, H Detail, V Detail, Det Band, White Clip, Aspect,
Format, H Phase, Col Phase, Fine Phase, Absolute/Relative, Masking, Auto Setup, Manual/Auto Focus,
Monochrome, Lens stabilization, Freeze, Negative, Camera Power, H flip, V flip. (Note these are
dependent on particular camera availability).
Pan & Tilt functions including:- Pan, Tilt, Zoom, Focus, Wipe, Wash, 2 x remote switches, Pan endstops,
Tilt endstops, Zoom drift compensation, Focus offset adjustment.
Setup Functions including:- Camera type selection by Manufacturer and Model, Timing functions on/off.
Dimensions
Desktop Case - Width 138mm, Length 325mm, Height max 78mm
Rack Mount - Width 102mm, Length 294mm (354mm with extension plate), Height 49.5mm
Weight
2.1kg (Mounted in Desktop Case)
Power Input and Consumption
Input:- 9 – 18v DC
Current consumption approx:- 120ma @ 12v
Power consumption approx:- 1.5 watts