Operating instructions

Part 3 - Remote Setup
37
Tampering
Select Tampering to configure tampering detection
event settings. With tampering detection event
enabled, a sudden change in the video, such as due
to movement of the camera or covering up of the lens,
will be assumed as an event.
DC-T1232WR model
DC-T1234WR model
DC-T1233WHR model
• Sensitivity: Define the tampering detection
sensitivity. Higher values will result in more sensitive
detection.
• Activation time: Specify how long tampering
has to be detected for it to be considered as an
event. Tampering detections that do not last for the
specified duration of time will not be considered as
events.
• Use Ignoring Time: Define the event ignoring
time. Tampering detections taking place during the
defined time range will not be assumed as events.
• Event Action: Select a tampering detection event
alert action.
- Alarm Out: Select if you wish to generate an
alarm out.
DC-T1234WR model only
- Send Email: Select if you wish to send an email.
Select the Image Attachment option to attach a
.jpg image of the event detected to the email.
- Remote Callback: Select this option to send
a message to a remote system and then select
which system to send the message to.
• Not supported from the IDIS Web program.
• The camera must be registered to the remote
system in order to use the Remote Callback
feature.