Operating instructions

Part 3 - Remote Setup
34
DC-T1234WR model
DC-T1233WHR model
• Sensitivity: Select daytime and nighttime motion
detection sensitivity levels. Higher values will result in
more sensitive motion detection.
• Minimum Blocks for Detection: Select minimum
blocks for daytime and nighttime motion detection.
Motion must take place over the selected number of
blocks in order for it to be considered as a motion
detection event.
• Motion Zone: Click Setup and define the motion
zone using blocks.
-
(Select)/ (Unselect): Enable/disable motion
detection.
-
(Single Block): Select/unselect motion
detection blocks individually.
-
(Zone): Select/unselect multiple motion
detection blocks.
-
(All): Select/unselect all motion detection
blocks.
• Motion Ignoring Interval: With Motion Ignoring
Interval configured, no event log or notification is
generated for motions detected during a period of
time following a motion detection event.
• Daytime: Specify when daytime starts and ends. All
other times will be assumed as nighttime.
• Event Action: Select a motion detection event alert
action.
- Alarm Out: Select if you wish to generate an
alarm out.
DC-T1234WR model only
- Send Email: Select if you wish to send an email.
Select the Image Attachment option to attach a
.jpg image of the event detected to the email.
- Remote Callback: Select this option to send
a message to a remote system and then select
which system to send the message to.
• Not supported from the IDIS Web program.
• The camera must be registered to the remote
system in order to use the Remote Callback
feature.
- Audio Alarm: Select this option to generate an
audio alert and then choose an audio file (.wav).
DC-T1233WHR model only
- FTP Upload: Select this option if you wish to
upload images to the FTP server.
• Event Action settings must be configured
correctly in order to perform event actions.
• This setting does not affect the motion
detection by the PIR sensor.
DC-T1234WR model only