Operating instructions

Part 3 - Remote Setup
33
• Settings: Configure image and upload settings.
- Upload Type: Choose an upload type. Select
Always to upload images using the settings
below, irrespective of event detection. Select
Event to upload images using the settings below
when an event is detected.
- Upload Frequency: Activated only when Upload
Type has been set to Always. Designate the
upload speed. The specified number of images
will be uploaded to the FTP server during the
specified period of time.
- Upload 1 image per: Activated only when
Upload Type has been set to Event. Designate
the upload speed. Select Upload for and specify
a duration. Images will be uploaded for the
specified duration at the specified upload speed.
Select Upload while event status is active to
upload images at the specified speed only while
event status is active.
- Resolution/Quality: Choose the resolution and
quality of the images to upload to the FTP server.
Range of resolution settings you can use here can
vary depending on the resolution setting applied
under Video > Streaming.
- Base File Name: Enter a name for the files to
be uploaded to the FTP server and then choose
file identification options. Select Add Date/
Time Suffix to add event detection date and
time information to each image file. Select Add
Sequence Number Suffix - max. Count to
number the image files based on the order of
event detection. Select Overwrite to overwrite
the previous image with the new image. Event
type is automatically added to the file names.
• When specifying the Upload Path or Base File
Name, you cannot use special characters such as
\, /, #, *, |, :, ", <, >, and ?.
• The resolution of FTP upload image can change
depending on the resolution setting applied under
Video > Streaming.
• Set speed settings for Upload Frequency and
Upload 1 image per options in consideration of the
FTP server's performance. FTP uploads can fail if
the configured speed is higher than what the FTP
server can handle.
Event
Configure event detection settings.
Motion Detection
Select Motion Detection to configure motion
detection event settings. With motion detection event
enabled, motion detections within the designated area
will be assumed as events.
DC-T1232WR model