Operating instructions

Part 3 - Remote Setup

Webcasting

Use the webcasting service to view live images from

the camera on a web site.

• HTML Code: Copy and paste the html code shown

on the screen within the code of the web page you

want the video to be displayed.

• Stream: Choose a stream to use for webcasting.

Only a stream currently in use can be selected.

In order to use the webcasting service, the Allow

Anonymous Login option under System > User/

Group must be selected.

MAT

Select the MAT option to use the MAT (Motion

Adaptive Transmission) feature during video

transmission and recording.

• Sensitivity: Set the motion detection sensitivity.

Higher values will result in more sensitive motion

detection.

• Inactivity Period: Set the Inactivity Period. If

motion is not detected for the duration of time

specified, video is transmitted and recorded using

the frame rate designated below until movement is

detected again.

• Frame Rate: Designate the frame rate to be used

between the end of the Inactivity Period and the

next motion detection. When the slow shutter

mode is enabled under Video > Camera menu,

the fame rate may change. Video is transmitted

and recorded at the designated frame rate between

then end of the Inactivity Period and the next motion

detection. Once motion is detected again, the

frame rate designated under Streaming is restored

immediately.

MAT (Motion Adaptive Transmission) is a feature

that lowers the frame rate when motion is not

detected to reduce the load on the network and save

on storage space. Based on the specified sensitivity

setting, no movement will be assumed if there is no

change between two consecutive images.