Operating instructions

16
Configure basic network camera settings and all other
system settings.
Screen images may vary depending on the model.
Camera Protocol
Camera supports DirectIP™ and IDIS protocols.
• DirectIP™ protocol:
- Using with a DirectIP™ NVR enables camera use
without the need to configure network settings.
- The DirectIP™ NVR also allows you to control all
camera settings directly from the NVR, without
the need for a computer.
For more information on configuring camera settings
from a DirectIP™ NVR, refer to the DirectIP™'s
operation manual.
• IDIS protocol:
- Control the camera over the network from
software installed on a computer or a separate
NVR.
- Ideal for using the camera over the network from
a remote location.
Remote Setup
1
Launch the IDIS Discovery program and then from
the main screen select a network camera whose
protocol you wish to change.
2
Click on the Setup icon and then select Setup
→ Protocol Setup. A Protocol Setup screen will
appear.
• Alternatively, you can select Network Camera
from the main screen and then right-click to
access the Protocol Setup screen.
3
From the Protocol Setup screen, select the IDIS
and then click OK.
4
Click on the Setup icon and then select Setup
→ Remote Setup. A Remote Setup screen will
appear.
• Alternatively, you can select Network Camera
from the main screen and then right-click to
access the Remote Setup screen.
• This operation manual has been composed based
on IDIS protocol use.
• System settings can also be changed using a
remote program.
Part 3 - Remote Setup