Owner`s manual

Page 6
WC-1 WIRELESS CONTROLLER
Network Discovery & Download
WARNING!! Before proceeding, a Custom Professional is required
to install and configure your WC-1.
1. Open a new or current project. In Step 3: Add URC Devices, add
an WC-1 to a room included in your project which represents the
physical location of the unit.
2. In Step 6: Network Setup, discover the WC-1 using the same
process used for other Total Control network products in the
project.
3. Press the Download button within the Program menu.
4. Make sure to check the WC-1 checkbox, then press the
Download to Selected Devices (Direct) button.