User's Manual

……………………………………………………………………………………………………
13
LOCK” to current setup state, You can press any device key (e.g.
) to finish set up
or press the
key to last state, or you can use or to select other set
up.
S E T 3 S
AMP
Remark: You can only lock one device for volume and mute of your new remote control.
The locked device will be unlocked when you lock on the other device automatically.
C Device Lock
You can use Device lock function to fix current device code and this device code can’t
be changed by a new set up such as brand and code set up or auto search. You can
set it to the “OFF” to quit from this function.
1 Press and hold the “
“key for more than 3 seconds, then release it.
2 Press the
or key to select the “CONFIGURE”, then press the
key.
3 Press the or key to select the “DEV LOCK”, then press the
key.
4 Press the device key to select the device that you want to fix, such as
.
5 Press the or key to change to the “ON” or “OFF” mode.
6 Press the
key to save the setting and LCD display “SUCCESS” then “DEV
LOCK”, exit to current setup state. You can press any device key (e.g.
) to
finish the set up or press the key to last state, or you can use or
to select other set up.
C O D E S E T U P
T V 0 1 0
1 1 : 4 5
C O N F I G U R E
V O L L O C KT I M E S E T U P
T V O N
A M P O F F
A M P O F F
S U C C E S S