IMPK6VR manual 1.
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 2 TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features And Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Device Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 3 INTRODUCTION The One For All 6-Device PVR Universal Remote Control (URC-6131) is designed to remotely operate up to six home entertainment devices and features intuitive and easy-to use buttons to operate PVR (Personal Video Recorders) and DVD components. Its sophisticated technology will allow you to consolidate all of your original home entertainment remote controls into one easy-to-use product.
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 4 FEATURES AND FUNCTIONS Use the illustration below to locate features on the One For All 6-Device PVR Universal Remote Control (URC-6131) and then study the Key Charts (on the next three pages) to learn how they function. To find out what type of devices can be controlled by each device key after programming, see the Device Table on page 7.
2/21/03 5:46 PM Page 5 Key Charts When the LED (red light) blinks, the remote control is working and (after programming) is sending signals. Press TV, PVR, DVD, CBL/SAT, AUD, or VCR once to select a desired home entertainment device to control.Also see the Device Table on page 7. Press POWER once to turn on or off the selected device. For master power control, see Programming Master Power on page 12. Press MENU once to display your selected device’s main menu. For PVRs, use PVR Menu.
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 6 FEATURES AND FUNCTIONS Key Charts (continued) Press Prev. once to recall the lastviewed channel and to page back one screen on the main menu. In the AUD mode, use Prev. to select the receiver band. Use or to perform the Thumbs Down or Thumbs Up feature on your Tivo/PVR device. Press PVR Menu once to turn the PVR’s main menu on or off. Use to command your PVR to skip or advance through a recorded program scene or commercial.
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 7 Press ENTER once after entering the channel numbers on some TVs. Use TV/VID to switch the TV’s input to view TV or video programs. Use PIP to switch the Picture-InPicture feature on or off (if available on your TV). Use Swap to switch images and sound between the main and window pictures. Use Move to move the window picture to different positions in the main picture. Use SET for all programming sequences.
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 8 INSTALLING BATTERIES ❶ ❷ ❷ ❸ 1. On the remote control’s back, push the tab and lift off the battery cover. 2. Obtain two (2) new AA alkaline batteries. Match the + and – marks on the batteries to the + and – marks in the battery case, then insert the new batteries. 3. Press the battery cover back into place. The tab should click when the cover is locked. 4. Test the remote control by pressing any mode key (e.g., TV).
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 9 PROGRAMMING DEVICE CONTROL The One For All 6-Device PVR Universal Remote Control is preprogrammed at the factory to operate an RCA TV, VCR, and satellite receiver, a Philips Tivo PVR, a Toshiba DVD player, and a Pioneer audio receiver/amplifier. To control devices other than the default brands, perform the following steps; otherwise skip this section: NOTE: For DVD Player/VCR Combo control, see the next page. 1. Turn on a desired device (e.g.
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 10 PROGRAMMING DEVICE CONTROL (continued) 6. Repeat steps 1 through 5 (on the previous page) for each device you want to control. For future reference,write down each working device code in the following boxes: TV Code: PVR Code: DVD Code: CBL/SAT Code: AUD Code: VCR Code: PROGRAMMING DVD PLAYER/VCR COMBO CONTROL 1. Turn on the DVD Player/VCR Combo and insert a DVD. NOTE: Please read steps 2 through 4 completely before proceeding.
IMPK6VR manual 1.0 2/21/03 5:46 PM 5. Page 11 If you’ve located a setup code that works, but it also has a separate VCR code, you’ll also need to program it into the remote control to access VCR controls as follows: a. Press VCR once. Then press and hold the SET key until the LED blinks twice. b. Enter the VCR code for your DVD Player/VCR Combo. If correct, the LED will blink twice.
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 12 CHECKING THE CODES If you have set up the remote control using the Searching For Your Code procedure (on the previous page), you may need to find out which four-digit code is operating your equipment. For example,to find out which code is operating your TV: 1. On the remote control, press TV once. 2. Press and hold SET until the LED (red light) blinks twice, then release SET. 3. Enter 9 - 9 - 0. The LED will blink twice. 4.
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 13 2. Enter 9 - 9 - 5. The LED will blink twice. Then press POWER once. 3. For the first device you want in the power on sequence, press its device key (e.g., CBL/SAT) once. 4. Repeat step 3 up to five more times to add desired devices to the power-on sequence. 5. To save the settings and exit the program, press and hold SET until the LED blinks twice, then release SET. Operating Master Power 1.
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 14 USING KEYMOVER The One For All 6-Device PVR Universal Remote Control includes a Keymover feature that allows you to map (or copy) keys from one mode (i.e., source mode) to another mode (i.e., destination mode). NOTE: The following keys cannot be used as a source or destination: TV, PVR, DVD, CBL/SAT, AUD, VCR, and SET. Programming Keymover For example, if your VCR does not have volume control, you can map those keys (i.e.
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 15 Restoring All Keymoved Keys In A Single Mode 1. Press and hold SET until the LED (red light) blinks twice, then release SET. 2. Enter 9 - 9 - 4. The LED will blink twice. 3. Press the destination mode twice (where keymoved keys are stored). The LED will blink twice. RE-ASSIGNING DEVICE KEYS The One For All 6-Device PVR Universal Remote Control can be set to control a second TV, PVR,VCR, DVD player, or other device.
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 16 CHANGING VOLUME LOCK The One For All 6-Device PVR Universal Remote Control is set at the factory for independent volume control of each selected device. However, you may change the Volume Lock setting to Global Volume Lock so that a device’s volume will be locked to one mode (e.g., to control TV volume in all other modes).After that, if desired, you can perform Individual Volume Unlock on a selected device to set its volume control for independent operation.
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 17 Unlocking All Volume Control (Restoring Default Setting) NOTE: Performing these instructions will restore independent volume control for all programmed devices (e.g., TV volume control in TV mode, VCR volume in VCR mode, etc.). 1. On the remote control, press and hold SET until the LED (red light) blinks twice,then release SET. 2. Enter 9 - 9 - 3 and then press VOL+ once. The LED will blink four times. 3.
IMPK6VR manual 1.
IMPK6VR manual 1.
IMPK6VR manual 1.
IMPK6VR manual 1.
IMPK6VR manual 1.
IMPK6VR manual 1.
IMPK6VR manual 1.
IMPK6VR manual 1.
IMPK6VR manual 1.
IMPK6VR manual 1.
IMPK6VR manual 1.
IMPK6VR manual 1.
IMPK6VR manual 1.
IMPK6VR manual 1.
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 32 TROUBLESHOOTING (continued) PROBLEM: DVD/VCR Combo does not respond properly. SOLUTION: Use the VCR codes for your brand. Some combo units may require both a DVD code and a VCR code for full operation. PROBLEM: Changing channels does not work properly. SOLUTION: If the original remote control required pressing ENTER to change channels, then press ENTER on the remote control after entering the channel number.
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 33 ABOUT UPGRADING The One For All 6-Device PVR Universal Remote Control has the largest infrared code library available. However, if you purchase a brand new home entertainment device, it may not respond to the codes stored in the remote control’s memory. If this happens, please contact our Customer Support department (see Customer Support on the next page) to upgrade the remote control.
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 34 CUSTOMER SUPPORT For assistance, please contact us in any of the following ways: • E-mail: ofasupport@ueic.com • Internet: http://www.oneforall.com • Consumer Help Line: (330) 405-8615 INSTRUCTIONS TO THE USER This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 35 LIMITED WARRANTY One For All (“OFA”) warrants, to the original purchaser only, that this product will be free from defects in materials and workmanship, under normal use, for ninety (90) days from the date of original purchase.
IMPK6VR manual 1.0 2/21/03 5:46 PM Page 36 ADDITIONAL INFORMATION As you update your home entertainment system, One For All® has a universal remote control that will fit your needs. Look for these exciting products at a retailer near you. One For All Access 3 . . . . . . . . . . . . . . . . . . . . . URC-3605 One For All Big Easy 3-Device. . . . . . . . . . . . . URC-3300 One For All Video Expert 4-Device . . . . . . . . . URC-4041 One For All Big Easy 4-Device. . . . . . . . . . . . .
