Technical data

Technical Manual Cold Storage Controllers TKP / TKC x130 - x140 Page 3
Programming
All readable and adjustable values (parameters) of the TKx units are listed on several pages. While normal operation or if no key is pressed
for about 3 minutes, the display shows the following informations:
1. priority: current failure (only if there is a failure at the moment)
2. priority: controller states (e.g. if it is turned OFF by a digital input)
3. priority: the selected 'Basic Display'
Call up and changing of parameters:
Operating Elements
Operating / Operating Elements
The operating elements of all TKP/TKC-types are identical,
independent from their housing.
The units can be operated by 4 keys, all parameters will be
displayed in plain text on the backlighted LC-display.
The TKP 3130/1 will be operated from keypad and display of the
VPR Compound Control System.
up / down ke
y
s
circuit 1
circuit 2
circuit 3
circuit 4
defrost
alarm
circuit 1
circuit 2
circuit 3
coolin
g
parameters and values
TKP-3000
LCD-displa
y
for
PROG
enter pa
g
e /
confirm values
ELREHA
LISTE
leave pa
g
e
Parameter Pages
Key Action
LISTE (= ESC), If no pagename is
displayed
ñ ò Select desired page
PROG Enter this page
ñ ò Select parameter
PROG Start programming,
parameter name flashes.
Eventually, the unit asks
here for an access code
('Identification', see next
page)
ñ ò Adjust desired value.
Pressing and holding a
key effects that the value
will be incremented or
decremented automati-
cally faster and faster.
PROG Leave programming
mode, confirm new value
Liste (= ESC) Back to page overview.
act.fail page
20.02.99 11:49
actual values
20.02.99 11:49
setpoint page
20.02.99 11:49
defrost page
20.02.99 11:49
mode page
20.02.99 11:49
assignment page
20.02.99 11:49
hist.fail page
20.02.99 11:49
ñ
LISTE
PROG
ò
ñ
ñ
ñññññ
PROG
PROG
PROG
PROG
PROG
PROG
actual failure,
etc.
last failure 1,
etc.
sensor 1, etc.
setpoint level X,
etc.
defrost mode, etc.
configuration
TKP/TKC Test
20.02.99 11:49
ñ
PROG
User Code
ñ
date, time, etc.