User`s guide

6
1 Remote Control Basics
INFO displays the Infobar, a feature that lets you see information on what
you’re watching, what’s coming on next, and what’s on other channels.
For more information on the Infobar, see section 3 Infobar.
EXIT causes your set top box to exit whatever screen you are seeing
and return you to normal TV viewing. If you ever get lost on a screen, it is
always safe to press EXIT and then start over.
Programming Your Remote
Step 1: Make sure your TV is on.
Step 2: With the remote you received from United Communications/Turtle
Mountain Communications, press the TV button. It should blink
once while you press it.
Step 3: Depending on the remote you have, press the following button:
ADB Focus Remote (page 1 of this guide book) press and hold
the SHIFT button until the TV button blinks TWICE. (This is the
gray remote that says UEI on the backside of it.)
ADB Potenza Remote (page 2 of this guide book) press and hold
the RCU SETUP button until the TV button blinks TWICE. (This is
the black remote.)
ADB Polaris Remote ( page 3 of this guide book) press and hold
the SETUP button until the TV button blinks TWICE. (This is the
gray remote that says United Telephone on the bottom of it.)
ADB Titan Remote ( page 4 of this guide book) press and hold
the SETUP button until the TV button blinks TWICE.
Step 4: Press the numbers 9-9-1, the TV button will blink TWICE.
Step 5: Aim the remote control at the TV and press:
ADB Focus Remote (page 1 in this guide book) the
POWER button
ADB Potenza Remote (page 2 in this guide book) the
POWER button
ADB Polaris Remote (page 3 in this guide book) the TV button
ADB Titan Remote (page 4 in this guide book) the number 1 on
the number pad and then press the POWER button
Step 6: Continually press and release the CH+ button until the TV turns off.
Stop when the TV turns off.