Owner`s manual

Using the Romote Control
The indicator flashes when the remote
batteries are low and you press a button on
the remote.
A warning banner may also appear on the
screen when you press a remote button and
your batteries are low.
Tip
To turn off all the RCA, GE, and Proscan
components that are connected to the TV,
press ON.OFF twice within two seconds.
This feature only works with most RCA, GE,
and Proscan products.
Note:
The DVD and AUXoHD buttons also turn on
most RCA, GE, and Proscan products.
INFO Brings up channel banner; press again to clear the screen.
INPUT Press to toggle through tile available input sources (VID1, VID2, FRNT,
CMP1, CMP2 and DVI. Press the CH+ or CH- bulton to resume "IV viewing).
MENU Brings up the Main menu.
MUTE Reduces the TV's volume to its minimum level. Press again to restore
the volume.
OK When in the menu system, selects highlighted items. When watching
"IV, freezes the picture until you press any" bulton on the remote to resume
normal TV viewing. Please note that when you "unfreeze" you go back to live
programming (skipping any programming lhat occurred dining lhe freeze).
ON-OFF When in TV mode, turns the "IV on and off. If in anolher component
mode (DVD or AUX*HD) and programmed, will turn the component on and
off. When pressed twice within two seconds, the ON* OFF button turns off most
RCA, GE and Proscan components.
PIP Press once to bring up the small picture-in-picture window. Press again to
bring up the picture-outside-picture (POP) windows. Press to remove POP. (See
Chapter 3 for more intk)rmation about using PIP.)
PIP + or PIP - When using PIP or POP, changes the channel in the picture
window.
PRESETS Displays the Picture and Sound preset sellings. Use the up and down
arrow bultons to highlight eilher Picture or Sound settings. Use the left and right
arrow bultons to change to a different Picture or Sound preset.
REVERSE, PLAY,FORWARD, RECORD, STOP, PAUSE If programmed,
provides transport control for some remote-controllable VCKs and DVD playei:s.
SKIP Press once belk}re changing channels and the "IV will wait 30 seconds
belk)re returning you to the original channel. Press repeatedly to add more time.
TV Turns on the TV and puts the remote in "IV mode. Also displays cmTent
status.
VOL- or VOL + Decreases or increases the TV's volume.
Chapter 2 Graphics contained within this publication are fi)r raprexenlation on{l_. _ 9