Titan OCAP Remote Control.fm Page 1 Tuesday, May 27, 2008 1:55 PM Titan Remote Control Users Guide Pour les instructions en français, veuillez consulter www.urcsupport.com Para instrucciones en español, por favor consulte www.urcsupport.
Titan OCAP Remote Control.fm Page 2 Tuesday, May 27, 2008 1:55 PM TABLE OF CONTENTS Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Key Charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Titan OCAP Remote Control.fm Page 3 Tuesday, May 27, 2008 1:55 PM FEATURES Control Your Home Theater Equipment The Titan universal remote control comes preprogrammed to operate the set-top box that is supplied by your service provider. In addition, Titan can be programmed to control 4 additional home theater equipment devices.
Titan OCAP Remote Control.fm Page 4 Tuesday, May 27, 2008 1:55 PM FEATURES AND FUNCTIONS Use the illustration below to locate features on the Titan Remote Control and then study the Key Charts (on the next three pages) to learn how they function. www.urcsupport.
Titan OCAP Remote Control.fm Page 5 Tuesday, May 27, 2008 1:55 PM Key Charts Key SETUP Function Use SETUP for all programming sequences. Press POWER once to turn on or off a home theater device. For MASTER POWER control, see “Using the Master Power Key” on page 19. Press AUX, DVD, AUD, TV, or STB once to select a home entertainment device to control. Each key has a red LED that blinks each time a key is pressed to indicate the current operating mode.
Titan OCAP Remote Control.fm Page 6 Tuesday, May 27, 2008 1:55 PM Key Function Use PAGE+ (or PAGE-) to page up (or page down) through menu screens and the program guide. Use A, B, C, or D as shortcuts to access additional features available honour set-top box menu screens, program guide, and interactive applications. . Use VOL+ (or VOL-) to raise (or lower) the audio volume. Press ON DEMAND for direct access to On-Demand programming and other interactive services.
Titan OCAP Remote Control.fm Page 7 Tuesday, May 27, 2008 1:55 PM Key Function Use PIP ON/OFF to open or close PIP window. Use SWAP to swap the primary viewing channel with the PIP channel. For a DVR/PVR, SWAP can be used to switch the active channel tuner. Use MOVE to move the PIP window location. Press PIP+/PIP- to change the PIP channel. INSTALLING BATTERIES 1 2 3 1. 2. On the back of the remote control, press your thumb on the indentation on the battery door and slide the battery door off.
Titan OCAP Remote Control.fm Page 8 Tuesday, May 27, 2008 1:55 PM 3. 4. NOTE: Slide the battery door back into place. It should securely fasten to the remote. Test the remote control by pressing any mode key (e.g., TV). If the batteries are inserted correctly, the LED (red light) will blink once. When batteries need replacement, the active mode LED will blink 5 times upon each keypress. Replace the batteries and the unit will be restored to its full functionality, complete with your favorite settings.
Titan OCAP Remote Control.fm Page 9 Tuesday, May 27, 2008 1:55 PM NOTE: 5. NOTE: If the selected mode LED emits a long blink, the entry is invalid. Repeat steps 2 through 4 and try entering the same code again. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 through 3, trying each code for your brand until you find one that works. If it still does not respond, try searching for the code (“Searching for Your Code” starting on page 9).
Titan OCAP Remote Control.fm Page 10 Tuesday, May 27, 2008 1:55 PM 1. 2. 3. Turn on your TV. On the remote control, press TV once; it blinks once. Then press and hold SETUP until the TV key blinks twice. Enter 9 9 1. The TV key blinks twice. 4. Enter one of the following four digits: COMPONENT TYPE COMPONENT ID # Set-Top Boxes (Cable, Sat, etc.) 0 TV 1 DVD/VCR/DVR 2 Audio Devices 3 5. Aim the remote control at the TV and press POWER once. 6.
Titan OCAP Remote Control.fm Page 11 Tuesday, May 27, 2008 1:55 PM CHECKING THE CODES If you have programmed one of your Titan remote's mode keys by searching for your device code (on the previous page), you may need to find out which fivedigit code is operating your equipment. For example, to find out which code is operating your TV: 1. On the remote control, press TV once; it blinks once. Then press and hold SETUP until the TV key blinks twice. SETUP 2. Enter 9 9 0. The TV key blinks twice. 3.
Titan OCAP Remote Control.fm Page 12 Tuesday, May 27, 2008 1:55 PM • Learning capacity is approximately 16 to 25 keys, depending on the code being learned. • Certain device functions are not learnable including multi-frequency types, some high frequency ones, and other unusual formats. • For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent lights. NOTE: Please have your original remote controls handy before programming learning.
Titan OCAP Remote Control.fm Page 13 Tuesday, May 27, 2008 1:55 PM 5. SETUP tions” on the previous page. If needed, also see “Troubleshooting” on page 23. After review, start programming again at step 1. Repeat steps 2 through 4 for another mode and/or key or press and hold SETUP to exit programming. Deleting a Single Learning Key This process returns the key to its original programming for the mode you select.
Titan OCAP Remote Control.fm Page 14 Tuesday, May 27, 2008 1:55 PM PROGRAMMING VOLUME LOCK Volume Lock allows you to set your remote to direct all volume commands to whichever home theater device you designate as your audio source. By default, Global (All) Volume Lock is set to TV, so you can control TV volume while in any mode on your remote. You can also perform Volume Lock on a selected device or set of devices to set Volume Lock to function on some modes, but not on others.
Titan OCAP Remote Control.fm Page 15 Tuesday, May 27, 2008 1:55 PM 4. 5. SETUP Press each mode key that relates to the devices that you do not use for volume control. These will be the modes in which the volume functions control the device related to the mode key you pressed in step 1. Any mode omitted from this step will have all volume controls assigned to that mode's device. Press SETUP to save. The mode LED blinks twice.
Titan OCAP Remote Control.fm Page 16 Tuesday, May 27, 2008 1:55 PM 2. Enter 9 7 3. The mode LED (e.g., TV) blinks twice. 3. Press CH+ once. The mode LED (e.g., TV) blinks once. 4. Press the mode key for the device that you want to use for channel-changing. The mode LED blinks twice. Now, regardless of what mode you select, the channel keys will only change channels on the assigned device.
Titan OCAP Remote Control.fm Page 17 Tuesday, May 27, 2008 1:55 PM Unlocking Channel Control To unlock Channel Lock and thus allow the channel control functions to work with the device associated to the active operating mode, follow these steps: 1. Press and hold SETUP until the mode LED SETUP blinks twice. 2. Enter 9 7 3. The mode LED blinks twice. 3. Press CH- once. The mode LED blinks four times. Now the channel functions correspond to the active mode (e.g.
Titan OCAP Remote Control.fm Page 18 Tuesday, May 27, 2008 1:55 PM Programming a Macro Key 1. On the remote control, press and hold SETUP SETUP until the mode LED blinks twice. 2. Enter 9 9 5. The mode LED blinks twice. 3. Select a macro key (for example, F1) and press it once. The mode LED blinks once. Press the key sequence you want to program into the macro. For example, to turn on your TV and raise its volume, press TV, POWER, VOL+, VOL+, VOL+.... 4. NOTE: 5. SETUP 6.
Titan OCAP Remote Control.fm Page 19 Tuesday, May 27, 2008 1:55 PM page 18). If desired, repeat these to clear another TuneIn key. USING THE MASTER POWER KEY The Titan Remote Control has a unique feature that allows you to sequentially turn up to five of your home entertainment devices on or off with a single key press. NOTE: MASTER POWER only works in the STB mode. In any other mode, pressing MASTER POWER once will turn the selected device on or off. Programming the Master Power Key 1. Press the STB key.
Titan OCAP Remote Control.fm Page 20 Tuesday, May 27, 2008 1:55 PM Using the Master Power Key 1. Press STB once. Press POWER. The remote sends a power command to each device that was included in the Master Power Macro. 2. Clearing the Master Power Key 1. On the remote control, press STB once. 2. SETUP Press and hold SETUP until the mode LED blinks twice. 3. Enter 9 9 5. The mode LED blinks twice. 4. Press POWER once. 5. SETUP Press and hold SETUP until the mode LED blinks twice. www.urcsupport.
Titan OCAP Remote Control.fm Page 21 Tuesday, May 27, 2008 1:55 PM BACKLIGHTING The Titan Remote Control is equipped with backlit keys to make it easy to use in dark ambient lighting. By default, Titan's backlighting is enabled to light after keys are pressed (other than the OK key). You can disable the backlighting by following the steps below: Disabling Backlight 1. Press and hold SETUP until the mode LED SETUP blinks twice. 2. Enter 9 7 2. The mode LED blinks four times. 3.
Titan OCAP Remote Control.fm Page 22 Tuesday, May 27, 2008 1:55 PM RE-PROGRAMMING SET-TOP BOX CONTROL The Titan Remote Control comes pre-programmed to control the set-top box supplied by your service provider. In addition, it is locked to prevent inadvertent deletion or change of set-top box control. In the event that you need to change the STB key to control a different brand/model of set-top box, follow these steps: 1.
Titan OCAP Remote Control.fm Page 23 Tuesday, May 27, 2008 1:55 PM TROUBLESHOOTING PROBLEM: Device mode key does not blink when you press a key. SOLUTION: Replace the batteries with two (2) new AA batteries (see “Installing Batteries” on page 7). PROBLEM: Device key blinks when you press a key, but home entertainment device does not respond. SOLUTION: Make sure you are aiming the remote control at your home entertainment device and that you are within 15 feet of the device you are trying to control.
Titan OCAP Remote Control.fm Page 24 Tuesday, May 27, 2008 1:55 PM FCC NOTICE This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.fm Page 36 Tuesday, May 27, 2008 1:55 PM Carver Celebrity Celera Changhong Citizen Clairtone Clarion Commercial Solutions Concerto Contec Craig Crosley Crown Curtis Mathes CXC Cytron Daewoo Dell Denon Denstar Diamond Vision Digital Lifestyles Digital Projection Inc.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.
Titan OCAP Remote Control.fm Page 54 Tuesday, May 27, 2008 1:55 PM Systemax Tagar Systems Toshiba Touch Viewsonic Voodoo Xbox ZT Group 01272 01272 01272 01272 01272 01272 02049 01272 www.urcsupport.
Titan OCAP Remote Control.fm Page 55 Tuesday, May 27, 2008 1:55 PM NOTES www.urcsupport.
Titan OCAP Remote Control.fm Page 56 Tuesday, May 27, 2008 1:55 PM M2056-C Revision 1.
