Owner's Manual

Erasing Memory Buttons

Select the mode (AUD or SAT) in which you want to

erase the Memory Button.

2 Press the corresponding Device Button (AUD or SAT) and

MUTE button, simultaneously. SET will appear in the

LCD. Press the Memory Button to be erased. M(1-5)_# #

will appear in the LCD.

3 Press the CHANNEL UP button. SAVE will flash in the

LCD. The Memory Button is now erased.

Note: Any previously stored commands on a Memory Button

will be erased when new commands are stored on the same

Memory Button.

Advanced Features

1 Press the Audio Device Button and the MUTE button

simultaneously. SET will appear in the LCD.

2 Press Memory Button M2. M2_ # # will appear in the LCD.

3 Press the MUTE button (to turn on the Audio receiver)

M2__01 will appear in the LCD.

Press the TV Device Button (to change to the TV mode)

M2__02 will appear in the LCD.

Press the MUTE button (to turn on the TV)

M2__03 will appear in the LCD.

Press the VCR Device Button (to change to the VCR mode)

M2__04 will appear in the LCD.

Press the MUTE button (to turn on the VCR)

M2__05 will appear in the LCD.

Press the SAT Device Button (to change to SAT mode)

M2__06 will appear in the LCD.

Press the MUTE button (to turn on the Satellite receiver)

M2__07 will appear in the LCD.

Power On/Off is located on the MUTE button during the

programming mode.

4 Press the CHANNEL UP button. SAVE will flash in

the

LCD, and the remote will return to the AUDIO mode.