Specifications

42” HD Gas Plasma Display Rosen Aviation Displays, LLC
5
Getting Started
Unpacking
Carefully remove all components of the display from the packaging. Place the display face
(glass side) down on a soft, flat surface for ease of installation.
Note: The original packaging materials should be kept in case of service or
relocation. Replacement packaging may be purchased from the factory.
When the 42" HD digital display is installed and operating properly, please
store this manual in a safe place for future reference.
Pre-installation
Figure 1 shows the pieces included with your new digital display. Please check the
equipment included in this shipment to confirm that the pieces shown are included. If they
are not, then please contact your dealer or distributor immediately.
Figure 1
Note: the IR remote control may be a different style than shown in Figure 1. Remote
control information is included in Appendix B on page 22.
Caution
Extreme caution should be taken when unpacking the digital monitor.
It has been designed for rugged use; however the display monitor
contains glass that could break if dropped. Appendix A (page 20)
shows how the 42" HD gas plasma display was packaged for
shipment. This will guide your efforts to unpack the system.