Specifications

42” HD Gas Plasma Display Rosen Aviation Displays, LLC

Safety

General Safety

Physical Safety

Electromagnetic Compatibility (EMC)

This Equipment has been designed to meet the requirements of F.C.C. part 15 and CE

Directive 89/336/EEC with applicable harmonized standard EN-55022. These

requirements are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy. Installation and Connection on page 6 of

this manual lists installation guidelines for the 42" HD gas plasma display

to be FCC and

CE compliant. If this system is not installed and used in accordance with the instruction

manual, it may cause interference to radio communications.

Design Safety

This Equipment has been designed in accordance with the safety and material guidelines

set forth in CSA/UL 1950. Most of the materials are CSA/UL listed. The display has been

designed with a special glass front filter to minimize the risk of shattering, if broken. For

additional information on the safety verification status of this equipment, refer to Installation

and Connection (page 6).

Caution

To reduce the risk of electric shock, do not remove any covers

from the display. Refer servicing to an authorized distributor or

factory trained service technician.

Warning

To avoid the risk of fire and electric shock, do not expose

this product to corrosive environments including ocean

spray, rain, or moisture; do not allow water or other liquids

in the unit. Exposure to such environments can cause

serious damage to the unit that would not be covered under

warranty.

Caution

Use the three-prong AC power cord supplied with the unit

to ensure that proper ground connection is maintained. A

safety ground lug is also provided on the unit and should

be used in accordance with your local electrical code.

Failure to provide a proper ground from the installation’s

power source may result in injury to personnel and serious

damage to the unit that would not be covered under

warranty.