Specifications

42” HD Gas Plasma Display Rosen Aviation Displays, LLC

APPENDIX C: OSD MENU STRUCTURE & COMMANDS

Rosen Aviation Displays, LLC, 42" HD Gas Plasma Display Technical Manual

PIP Control Menu

The Picture in Picture (PIP) control menu allows full flexibility in viewing 2 sources at the

same time. Keep in mind some limitations were noted under PIP Modes in the main text.

Choose a viewing source, such as S-Video, and then

move to enable and turn it on.

The PIP window appears. Position it as desired on

the screen and/or adjust the size. It is possible to

shape the picture by increasing only one dimension

of the window such as increasing the horizontal size

and not increasing the vertical size. If the application

changes the main screen source, the PIP settings will

not be saved. The only exception to this is when a

user invokes a PIP SWAP using the direct IR key

code or the RS232 command.

Use the up or down arrows to select and change

settings from the factory default.

FlexiScreen Menu

FlexiScreen

is applicable to all input menus during a valid source. The FlexiScreen

format refers to the active picture size and position on the screen.

Preset SRC Formats:

Acadamy Open Matte

Super 35 VistaVision

Panavision Panavision

Technorama Custom

The FlexiScreen menu allows the application to

adjust the screen size so that the images fit the entire

screen or even go beyond the screen.

All of these attributes of the screen can be varied. The

ASPECT can be set to 16:9, 4:3 or 1:1. The source

(SRC) can be set to any number of preset dimensions

or can be set to custom as is indicated here.

If any of the dimensioning selections are changed, the

SRC automatically changes to custom. Below and left

is a list of preset SRC dimension names.

Use the up or down arrows to select and change

settings from the factory default.