Specifications

42” HD Gas Plasma Display Rosen Aviation Displays, LLC
34
APPENDIX C: OSD MENU STRUCTURE & COMMANDS
Rosen Aviation Displays, LLC, 42" HD Gas Plasma Display Technical Manual
YPbPr.2 Menu
The YPbPr.2 input uses the 3 BNC-style connector on
the HD DVC. You can supply a signal from 480p or
720p including 540p on this input. This input will not
accept the interlaced style input such as 1080i.
“None” on the menu’s first line will be replaced by the
resolution that has been detected. If a star (*) is next
to the resolution, the settings have been changed in
some way saved.
Use the up or down arrows to select and change
settings from the factory default.
YPbPr.2 Source Setup Menu
The source setup for YPbPr.2 input looks the same as
the analog RGB input, but does not interact with it.
Each of them is separate so that the application can
set up 2 totally different sources for these inputs. The
color space can be set to YUV HD, YUV SD, or RGB.
The system will detect what is best and the application
should not have to change the setting.
Use the up or down arrows to select and change
settings from the factory default.
Gain Control Menu
Use the Gain control menu to adjust the input gain
only if the automatic functions are not satisfactory to
the end application. In most cases, the application
should not have to interact with this menu.
Use the up or down arrows to select and change
settings from the factory default.