Specifications

42” HD Gas Plasma Display Rosen Aviation Displays, LLC
33
APPENDIX C: OSD MENU STRUCTURE & COMMANDS
Rosen Aviation Displays, LLC, 42" HD Gas Plasma Display Technical Manual
Analog RGB Source Setup Menu
In the analog RGB mode, the HD DVC assigns the
source setup values and it is not recommended that
the application change these settings. However, the
application can change them to provide for a shift in
the display as necessary.
Use the up or down arrows to select and change
settings from the factory default.
YPbPr (Component)
There are 2 separate YPbPr or component inputs. This type of input provides the best
analog video signal.
YPbPr.1 Menu
The YPbPr.1 input uses the 3 RCA style connectors
incorporated in the video bundle. This input is for use
with any interlaced or non-interlaced source.
Resolutions are from 480p/i to 1080i. See the
standard resolutions section of this manual for a
complete list of acceptable resolutions.
“None” on the menu’s first line will be replaced by the
resolution that has been detected. If a star (*) is next
to the resolution, the settings have been changed in
some way and saved.
Use the up or down arrows to select and change
settings from the factory default.
YPbPr.1 Source Setup Menu
The source setup for YPbPr.1 input look the same as
the S-Video and the composite inputs but do not
interact with each other. Each of them is separate so
that the application can set up 2 totally different
sources for these inputs. The YPbPr.1 input uses
only the CAV portion of this menu. There is no
need to change the top 5 menu selections in that
they have no effect on this input.
Use the up or down arrows to select and change
settings from the factory default.