Specifications

42” HD Gas Plasma Display Rosen Aviation Displays, LLC
31
APPENDIX C: OSD MENU STRUCTURE & COMMANDS
Rosen Aviation Displays, LLC, 42" HD Gas Plasma Display Technical Manual
Composite Source Setup menu
This menu is common to all composite sources. Any
changes here will vary the input source settings for all
composite inputs. The active menu items are
brightness, contrast, hue, color, and sharpness. The
CAV items are for a different input. Do not adjust
the CAV items while in the composite mode.
See the YPbPr.1 menu on page 33.
Use the up or down arrows to select and change
settings from the factory default.
S Video Menu
There are 2 S-Video inputs to the HD DVC. One is
direct to the HD DVC and the other is via the video
bundle.
The S-Video input is to control the S-Video input
directly to the HD DVC. “NONE” in the top line could
be replaced with NTSC or PAL, dependant on the
received signal from the composite signal’s connected
source.
Use the up or down arrows to select and change
settings from the factory default.
S Video.A Menu
The S-Video input is to control the S-Video input via
the video bundle to the HD DVC. “NONE” in the top
line could be replaced with NTSC or PAL, dependant
on the received signal from the composite signal’s
connected source.
Use the up or down arrows to select and change
settings from the factory default.
S Video and S Video.A Source Setup Menu
This source setup menu is NOT common to both S-
Video inputs. Any changes you make while under the
S-Video. An input affects only that input. Any changes
made while under the S-Video input will affect only
that input. Both of the S-Video inputs have this menu.
Use the up or down arrows to select and change
settings from the factory default.