Specifications

42” HD Gas Plasma Display Rosen Aviation Displays, LLC
23
APPENDIX B: REMOTE CONTROL OPERATION OVERVIEW
Rosen Aviation Displays, LLC, 42" HD Gas Plasma Display Technical Manual
SL8000 Home Theater Remote
Control
SL-8000 IR 42 HD
Remote Key
Function
POWER Power ON/OFF
PAUSE Cursor Up
F.F Cursor Right
STOP Cursor Down
REW Cursor Left
MENU OSD ON/OFF
1 YPbPr.1 SOURCE SELECTION
2 YPbPr.2 SOURCE SELECTION
3 S VIDEO SOURCE SELECTION
4 S VIDEO.A SOURCE SELECTION
5 ANALOG RGB SOURCE SELECTION
6 DIGITAL DVI SOURCE SELECTION
7 PIP TOGGLE SOURCE SELECTION
8 PIP SWAP
9 DIRECT IR MENU
0 POWER OFF
Note: These functions are the Factory Default and can be
changed in the OSD menu system.
To Program the Remote control for operation
with the 42HD Video Display, follow the steps
below.
1. Press and hold the TV and the Mute
buttons at the same time until the display on
the remote control say SET.
2. Enter in one of the following codes.
IR Code Switch Setting Code
1 004
2 138
3 019
3. Press the TV button to save the set up.
See the IR Code Switch location in Figure 2, on
page 7.
Find additional IR information under Operator
Controls and Indicators, on page 10.
Figure C.1 SL8000 Remote
Menu ON/OFF
OSD Right
Control
OSD Down
Control
Display Power
OSD Up
Control
OSD Left
Control