Specifications

42” HD Gas Plasma Display Rosen Aviation Displays, LLC
16
Instant On
This setup option enables the display to turn on and show video as soon as the power
is applied to the unit. If set to OFF, this option keeps the unit in the standby mode until
the user enables the display via the IR remote or the RS232 control.
OSD Background
When enabled, the OSD will have a solid background. If disabled, the OSD will not
have a distinctive background.
Freeze
This function enables you to freeze the image currently on the screen. Please note that
this function does not pause or stop the video source, only the screen.
Color Gamma
Within the Display Setup menu is the Color Gamma adjustments. In normal situations
this menu should not have to be used. However, if conditions or situations require an
adjustment to the color gamma curves, this can be accomplished in this sub menu. See
Appendix C (page 30) for full details.
Input Port Enable
This setup menu is very important while the unit is being installed (use in conjunction
with Operator Interface Connections, beginning on page 7). The installer is required to
turn on or off the unit’s various inputs. This menu, once set, should normally not require
further modifications after unit installation is complete. This Menu is a SMART menu in
that it will not allow conflicting inputs to be enabled. You must save the settings once
they have been set for the installation. A source cannot be selected from the
OSD unless it has been enabled and saved.
Direct IR Setup
Direct IR Setup menu is provided so that the user can customize the way the IR
controls the 42" HD gas plasma display with discrete commands. See Appendix B
(page 22) for full details.