Specifications

B7
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Home Automation Products
Home Automation Products
DHC Powerline Carrier Controllers
DESCRIPTION CAT. NO.
Burglar Alarm Interface — Simply plugs into a grounding 15 Amp receptacle.
Connects to an existing intrusion alarm and turns lights ON whenever the alarm
is tripped. Provides choice of 3 modes of light switching when activated. Either a
low-voltage input (6-18V AC, DC or audio) or a dry contact closure can trigger
the 6330. The unit has a test button that permits activation whether or not the
device is connected to an alarm system. The ALL OFF button turns OFF any-
thing that was turned ON by the unit. Available Color: Ivory.
Dry Contact Controllers
★
— Allow monitoring of up to four dry contact closures.
No. 6315 Maintained Contact Transmitter sends ON or OFF command signals in
response to contact opening or closure. No. 6316 Momentary Contact
Transmitter sends ON or OFF command signals in response to contact closure,
and no command signal upon contact openings. These units can be used with
photocells, infrared sensors, security system, motion sensors, and any other
dry-contact-based sensors. Installs in a single-gang wallbox. Color: Ivory.
Power to control side: 125V 60Hz AC Only.
LV LEAD COLOR TRANSMITS TO
Blue A1*
Orange A2*
Yellow A3*
Brown A4*
*
Or any four sequential address codes within the same Letter Code group
as the Transmitter.
All devices are UL Listed. Also CSA Certified except where indicated by
★
I
N
P
U
T
M
O
D
E
A
B
1
2
3
1
5
9
1
3
A
E
M
®
T
E
S
T
A
L
L
U
N
I
T
O
F
F
U
NIT C
OD
E
H
OU
SE
COD
E
A
E
M
I
1
5
1
3
9
SPECIFICATIONS & FEATURES
• Burglar Alarm Interface connects to existing
intrusion alarms, issuing flashing light
commands to DHC switching modules when
tripped for improved security
• Up to four transmitters can be wired into a
single branch circuit
• Dry Contact Transmitters link signaling from
photocells, infrared sensors, security sys-
tems, motion sensors, and other dry contact
transmitters to DHC controlled devices
• Backed by a Limited Two-Year Warranty
TESTING & CODE COMPLIANCE
•ULListed (File #E-66800)
•CSA Certified (File #LR-54628)
• NOM Certified (#057)
•UL224A Tested (and others as appropriate)
COLOR
Colors available as listed.
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
MAINTAINED DRY CONTACT TRANSMITTERS
Cat. No. 6315 & 6316
2.63 (66.8 mm)
2.75 (69.8 mm)
4.06 (103.1 mm)
.94
(33.3 mm)
1.75
(44.5 mm)
.44
(11.2 mm)
1.88
(47.8 mm)
BLACK
WHITE
A
EM
I
1
513
9
6330
6315, 6316
6330
6315, 6316
BURGLAR ALARM INTERFACE
Cat. No. 6330
1.55
(39.5 mm)
3.57 (90.7 mm)
2.20
(55.9 mm)
1
5
9
13
A
EM
®
TEST UNIT OFF
UNIT CODE HOUSE CODE
Residential Grade
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com