Specifications
B6
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
6417
6308
Home Automation Products
Home Automation Products
SPECIFICATIONS & FEATURES
• DHC Passive Infrared Sensor/Transmitters
can work alone or in multiple arrays to turn on
designated lighting inside and outside the
home when motion is detected for improved
security and safety
• Up to four transmitters can be wired into a
single branch circuit
• Photocell Sensor/Transmitters can add
“night watchman” automated switching
capability to any DHC network
• Backed by a Limited Two-Year Warranty
TESTING & CODE COMPLIANCE
•ULListed (File #E-66800)
• NOM Certified (#057)
•UL224A Tested (and others as appropriate)
COLOR
Colors available as listed.
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
DHC Powerline Carrier Controllers
DESCRIPTION CAT. NO.
Passive Infrared Controller — A motion-sensing light control ideal
for use in outdoor locations, such as backyards, garages and storage
buildings. Built-in infrared sensing technology monitors 4,000-sq. ft.
field, 110 degrees wide, up to 40 feet in front of unit. When the 6417
senses motion in its field of view, it can respond by sending two types
of signals: ON commands to Receivers set to control lights at four
sequential system addresses, and MOTION DETECTED signals to
other 6417’s set to the same address. As long as the source of
infrared radiation remains in the 6417 sensor field, it continues to send
ON signals every six seconds to these addresses, providing the
convenience of continuous illumination along a path from a garage to
an entranceway, or around an entire residence, if desired. It can also
turn on an inside lighting fixture as well as outdoor fixtures to help
deter intruders.
The 6417 is encased in a moisture-resistant housing. The control
panel includes sensitivity adjustments to prevent nuisance tripping by
small animals and a time delay to set the length of time the lights stay
on (6 seconds to 30 minutes). Manual override of the 6417 controller
can be achieved with the use of an HCC10-1TW Controller.
Passive Infrared Transmitter installs easily into standard round out-
door junction box and comes complete with mounting plate, control
unit, par lampholders and complete installation and operating
instructions. Color: Brown.
Photocell Controller — Automatically senses approaching darkness
and responds by sending ON commands to as many as four groups
of DHC Receivers (all receiver modules in each group must be set to
the same Letter Code). The Receiver Modules respond by turning
lights ON inside or outside the home. The 6308 will also transmit OFF
commands in response to a user-selected number of hours that it’s
been ON, or in response to approaching daylight. The Receivers
respond by turning their assigned lighting loads inside or outside the
home OFF. The 6308 mounts on a standard round or GEM electrical
box. Color: Gray.
All devices are UL Listed only, not CSA Certified.
PHOTOCELL TRANSMITTER
Cat. No. 6308
3.28 (83.31 mm)1.18 (45.9 mm)
4.48 (113.9 mm)
0.61
(15.4 mm)
BACK-WIRE HOLES
CODE
DIALS
6417
6308
Residential Grade
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com