Specifications
BASIC WALL MOUNTED PROGRAMMER—Cat. No. 6312
1.71
(43.5 mm)
1.38
(35.1 mm)
0.95
(24.1 mm)
5.51 (140.0 mm)
4.52 (114.9 mm)
2.72 (68.8 mm)
B2
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
1.64
(41.7 mm)
5.87 (148.1 mm)
4.45 (113.0 mm)
TABLE TOP CONTROLLER—Cat. No. 6320
4.73 (120.1 mm)
8.80 (223.5 mm)
2.41 (61.2 mm)
2.69 (68.3 mm)
2.25 (57.2 mm)
1.95
(49.5 mm)
2.34
(59.4 mm)
TOSCANA CONTROLLER—Cat. No. HCCPG-1TW
DHC Powerline Programmers/Controllers
DESCRIPTION CAT. NO.
Toscana
™
Deluxe Programmer — A powerful home automation controller that pro-
vides one-touch access to up to 64 deluxe lighting scenes and direct remote control
of up to 256 devices. Deluxe scenes can control up to 256 addresses to preset levels
when used with HCS08-1TW, HCS10-1TW, HCM06-1TW and HCM10-1TW
receivers. All other DHC receiver s can be included in deluxe scenes as ON/OFF
loads. Use HCCS7-1TW as a remote to activate deluxe scenes. Toscana features
2-way communication to confirm locally initiated status changes on receivers with
2-way capability. It allows up to 64 timed events (appliances ON/OFF, lights
ON/OFF/DIM /BRIGHT) including lights ON/OFF at dusk/dawn based on an astro-
nomical clock. Permits input of real-named devices (e.g. “wall sconce”) instead of
device code (e.g. “B5”). Individual timed events or up to 3 groups of timed events
can be run on a recurring basis. Built-in learning infrared receiver can learn up to16
button commands from any standard IR remote and trigger lighting events.
Permanent memory feature guaranteed 20-year life. All PC software and Toscana
upgrades provided for life. Mounts on standard 4-gang box. Shipped with white
frame and white cover. Color changes kits available for other colors.
Rated: 120V 60Hz AC only. Power Consumption: 3 Watts
Table Top Controller
★
— Provides manual remote control for all 256 DHC
addresses. Command functions include ON/OFF, ALL LIGHTS ON/ALL OFF and
DIM/BRIGHTEN. The 6320 plugs into any 120 volt AC receptacle to transmit
command signals over existing AC wiring.
Rated: 120V 60Hz AC only.
Basic Wall Mounted Programmer — A powerful home automation controller that is
easy to install and use. Compact, low-profile unit fits in single-gang wallbox. Accepts
up to four addresses; maximum two ON and two OFF commands per address.
SECURITY mode randomly selects ON and OFF times to make an empty home
appear occupied. ALL LIGHTS ON switch acts as a panic-button lighting system,
switching on all DHC switch modules with one touch. DIM/BRIGHTEN command
can automatically adjust lighting levels of all fixtures controlled by DHC dimming
receivers. LED readout shows time and program status; battery back-up protects
clock setting and program status for ten hours during power interruption.
Available in Ivory, White, and Almond.
Rated: 120V 60Hz AC only Power Consumption: 2.5 watts maximum
All devices are UL Listed. Also CSA Certified except where indicated by
★
HCCPG-1TW
6312-I
Home Automation Products
Home Automation Products
I
E
M
A
B
R
IG
H
T
L
IG
H
T
DIM
UNIT
ON
OFF
TIME
1
2
3
4
SECURITY CLEAR
®
A
E
C
M
O
I
G
K
M
A
N
U
A
L
C
O
N
T
R
O
L
L
E
R
1
2
3
4
5
6
7
8
9
1
0
1
1
1
2
O
N
B
R
I
G
H
T
A
L
L
L
IG
H
T
S
O
N
13
14
15
16
OFF
D
I
M
A
LL LIG
HTS
O
FF
SPECIFICATIONS & FEATURES
• Programmer adds user-devised scheduling to
DHC automated control of lights and appli-
ances for greater convenience, energy savings
and security
• Programmer and Controllers send DHC
switching commands over existing 60Hz
120V AC house wiring.
• Backed by a Limited Two-Year Warranty
TESTING & CODE COMPLIANCE
•ULListed (File #E-66800)
•CSA Certified (File #LR-54628)
• NOM Certified (#057)
•UL224A Tested (and others as appropriate)
COLOR
Colors available as listed: Ivory (-I), White (-W),
Almond (-A). See chart for Toscana color change kits.
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
6312-I,-W, -A
6320
HCCPG-1TW
Residential Grade
Cat. No. Cat. No. Cat. No. Cat. No.
Ivory Cover/Ivory Frame White Cover/White Frame Almond Cover/Almond Frame Smoke Cover/White Frame
DCKPG-0II DCKPG-0WW DCKPG-0AA DCKPG-0SW
COLOR CHANGE KITS FOR TOSCANA
Note: A Cat. No. HCA02-10E System
Amplifier must be installed in all panels
in every DHC installation to ensure
adequate signal strength.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com