Specifications

B17
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Home Automation Products
Home Automation Products
6287
6288
6386
SPECIFICATIONS & FEATURES
• These devices are designed to eliminate
interference from appliances, electronic
ballasts and home electronics in order to
insure top performance from DHC systems
• Backed by a Limited Two-Year Warranty
Signal Strength Indicator
• Signal strength testing equipment used to
ensure proper operation of DHC system
• Backed by a Limited Two-Year Warranty
TESTING & CODE COMPLIANCE
• NOM Certified (#057)
•ULListed (E-66800)
Signal Strength Indicator
•ULListed (File #E-66800)
• NOM Certified (#057)
•UL224A Tested (and others as appropriate)
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
PLUG-IN NOISE FILTER—Cat. No. 6288
1.43
(36.2 mm)
2.92 (74.2 mm)
1.17
(29.7 mm)
2.60 (66.0 mm)
IN-LINE NOISE REDUCER—Cat. No. 6289
NOISE BLOCK—Cat. No. 6287
1.85 (46.9 mm)
1.58 (40.1 mm)
BLACK LOAD
BLACK HOT L
WHITE NEUTRAL
R
5 AMP BLOCK
CAT. NO. 6287
U
L
®
LISTED
898F APPLIANCE CONTROL
6287
DHC Powerline Carrier Couplers and Filters
DESCRIPTION CAT. NO.
Noise Block — The 6287 is designed for use with DHC switch modules that
include a means for connection to neutral. This device may be wired on the
LOAD side of a DHC switch module (except 6383), or on the LINE side of any
fixture using an electronic ballast, a low-voltage ballast, or any noise-generating
source that does not require more than 5A 120V AC. The 6287 prevents
interference generated by fixture components from interfering with DHC signals.
Rated: 5A 120V 60Hz AC only.
Plug-in Noise Filter — electrical appliances may generate “noise” that could
interfere with proper signal transmission. When the offending appliance is iso-
lated and plugged into the 6288 Noise Filter, which is in turn plugged into a
receptacle, stray noise is filtered out, ensuring a clear signal. Color: Brown.
Rated: 5A 120V 60Hz AC only.
In-Line Noise Reducer — the 6289 Noise Reducer filters electrical “noise”
and signals with frequencies above and below the 121 kHz signal. The 6289
may be installed at the “noise” or signal source or at the module affected by the
interference. Depending on the source of the interference, the 6289 may be
wired phase to neutral or phase to phase.
DHC Powerline Carrier Test Equipment
DESCRIPTION CAT. NO.
Signal Strength Indicator — Measures command signal strength at individual
module locations. Minimum signal strength required for proper DHC Powerline
Carrier component operation is 100mV. For use with 6385 Signal Strength
Indicator.
All devices are UL Listed only, not CSA Certified.
6287
6288
6289
6386
Residential Grade
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com