Specifications

ManualsBrandsUniversal Remote Control ManualsUniversal RemoteRemote control HCCUR

DHC RECEIVERS

Wall Switches with

Scene Capability___________B10

Wall Switches _________B11, B12

Remote Switches __________B13

Double-Pole 20A

Wall Switch _______________B13

Rocker and Frame

Color-Change Kits _____B10–B13

Universal Low-Voltage

Module___________________B14

Plug-In Lamp Module _______B14

Wall Receptacles __________B15

Fixture Modules ___________B16

Power Extenders __________B16

DHC ANCILLARY DEVICES

Couplers and Filters________B17

Signal Strength Indicator____B17

Leviton’s Decora Home Controls (DHC) Residential Powerline

Carrier components provide homeowners with everything

needed for programmed and manual control of lighting and

appliances using their home's existing AC wiring.

Our current listing of DHC components features new program-

mers, controllers and receivers with Scene Lighting Capability

for coordinated, whole-house lighting control. This includes

models offering two-way communication, which enables

controllers in remote locations to show the On/Off status of

individual lighting loads. Many new DHC components feature

Intellisense

™

, a Leviton exclusive technology. Intellisense

reduces noise sensitivity without reducing command signal

sensitivity, resulting in the most reliable performance of any

powerline carrier home automation system available today.

DHC POWERLINE CARRIER

COMPONENTS

Overview __________________B1

DHC TRANSMITTERS

Basic Programmer __________B2

Table Top Controller_________B2

Toscana

™

Deluxe

Programmer _______________B2

Wall Switch Controllers___B3, B4

Wall Switch Controllers

with Scene Capability________B4

Universal Remote Controller__B5

Plug-in Transceiver _________B5

Key Chain Remote Controller _B5

Outdoor Passive Infrared

Transmitter ________________B6

Photocell Controller _________B6

Burglar Alarm Interface ______B7

Dry Contact Controllers______B7

DHC NETWORK INTEGRITY

PRODUCTS

System Ampliﬁer/

Coupler/Repeater ___________B8

Panel-Mounted Surge

Protective Devices __________B9

Home Automation

Products —

Decora Home

Controls (DHC)

SECTION

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.comCourtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Summary of content (18 pages)

PAGE 1
Home Automation Products — Decora Home Controls (DHC) Leviton’s Decora Home Controls (DHC) Residential Powerline Carrier components provide homeowners with everything needed for programmed and manual control of lighting and appliances using their home's existing AC wiring. Our current listing of DHC components features new programmers, controllers and receivers with Scene Lighting Capability for coordinated, whole-house lighting control.
PAGE 2
Residential Grade Features and Benefits ■ A network of controllers and DHC switch, dimmer, fixture and receptacle receivers that communicate via unique coded switching signals over a home’s AC wiring to automate control of lights and appliances ■ DHC components replace switches and outlets, which simplifies installation compared with other automation systems that require dedicated proprietary wiring backbones.
PAGE 3
Home Automation Products Residential Grade DHC Powerline Programmers/Controllers DESCRIPTION CAT. NO. Toscana™ Deluxe Programmer — A powerful home automation controller that provides one-touch access to up to 64 deluxe lighting scenes and direct remote control of up to 256 devices. Deluxe scenes can control up to 256 addresses to preset levels when used with HCS08-1TW, HCS10-1TW, HCM06-1TW and HCM10-1TW receivers. All other DHC receiver s can be included in deluxe scenes as ON/OFF loads.
PAGE 4
Residential Grade Home Automation Products DHC Powerline Carrier Wall Switch Controllers with 2-Way Communication HCC10-1TW in 80301-W DESCRIPTION CAT. NO. One-Address ON/OFF Controller — One ON/OFF rocker transmits ON/OFF commands to one address. Illuminated green LED at bottom of face indicates unit is On. (Note: Shipped in White only.
PAGE 5
Home Automation Products Residential Grade DHC Powerline Carrier Wall Switch Controllers with 2-Way Communication DESCRIPTION CAT. NO. Three-Address Dimming Controller — Three sets of ON/OFF buttons transmit ON/OFF commands to three sequential addresses in the same letter code group as this controller. One set of BRIGHT/DIM buttons transmits BRIGHT/DIM commands to the most recently selected address. (Note: Shipped in White only.
PAGE 6
Residential Grade Home Automation Products DHC Wireless Remote Control Components DESCRIPTION HCPRF-1TW & HCCUR HCCKR-E SPECIFICATIONS & FEATURES • Leviton's Universal Remote Control works with DHC-controlled lighting and appliances as well as audio/video system components • Ultra-compact Key Chain Remote adds to home security by allowing users to turn ON lighting as they approach entranceway, garage or driveway • Plug-In Transceiver features Intellisense™ Technology for optimum reliability, 2-way signa
PAGE 7
Home Automation Products Residential Grade DHC Powerline Carrier Controllers DESCRIPTION CAT. NO. Passive Infrared Controller — A motion-sensing light control ideal for use in outdoor locations, such as backyards, garages and storage buildings. Built-in infrared sensing technology monitors 4,000-sq. ft. field, 110 degrees wide, up to 40 feet in front of unit.
PAGE 8
Residential Grade Home Automation Products DHC Powerline Carrier Controllers DESCRIPTION CAT. NO. Burglar Alarm Interface — Simply plugs into a grounding 15 Amp receptacle. Connects to an existing intrusion alarm and turns lights ON whenever the alarm is tripped. Provides choice of 3 modes of light switching when activated. Either a low-voltage input (6-18V AC, DC or audio) or a dry contact closure can trigger the 6330.
PAGE 9
Home Automation Products Residential Grade DHC Network Integrity Products DESCRIPTION CAT. NO. COMPU IIFX MAC A NEW UL NEEDS R T WEISS STUAR B 6201 0V 120/24 r? Coupleer Repeat A N 0V 120/24 System , 15 A 2-Pole Breaker Circuit TER System Amplifier/Coupler/Repeater with Built-in Test signal Generator— Performs a variety of functions to ensure outstanding DHC system performance and reliability.
PAGE 10
Residential Grade Home Automation Products DHC Network Integrity Products Panel Mounted Surge Protective Devices (SPD) — Provides homes with protection from high-energy transient voltage surges that can damage sensitive electronic circuits in computers, audio and video components and electronic appliances. DHC components incorporate micro circuitry and Leviton highly recommends protecting the DHC network from powerline surges.
PAGE 11
Home Automation Products Residential Grade DHC Powerline Carrier Wall Switches DESCRIPTION CAT. NO. Single-Pole (One Location) or 3-Way (Multi-Location) Dimming Switch with Scene Control — Provides manual and remote ON/OFF switching and full range dimming for larger incandescent and magnetic low-voltage lighting loads such as chandeliers and multiple high-hats. Provides scene control capability when used with DHC Scene Controller Cat. No.
PAGE 12
Residential Grade Home Automation Products DHC Powerline Carrier Wall Switches with One-Button Programming HCM10-1DW in 80301-W HCS08-1TW in 80301-W SPECIFICATIONS & FEATURES • New One Button Programming • Provide Scene Control capability when used with DHC Scene Controller HCCS7-1TW and HCCPG-1TW Toscana Programmer. Also backward compatible with 16400/16450-S and 16400/16450-SD Scene Controllers • Receivers provide multi-station manual and remote On/Off switching and full-range dimming.
PAGE 13
Home Automation Products Residential Grade DHC Powerline Carrier Wall Switch Receivers DESCRIPTION CAT. NO. Multi-Location Incandescent Dimming Switch — Provides multi-station manual and remote switching and full-range dimming. When used with a 6294 Remote Switch equipped with Intellisense (gated automatic gain control) for outstanding performance and reliability. Responds to ON, OFF, DIM, BRIGHT, and ALL LIGHTS ON/ALL OFF commands. Preset feature turns lights ON at last selected brightness level.
PAGE 14
Home Automation Products Residential Grade DHC Powerline Carrier Wall Switch Receivers DESCRIPTION MS00R in 80301-W CAT. NO. 3-Way and 4-Way (Multi-Location) Remote Dimming Switch — This unit is only for use as a remote switch with DHC Cat. Nos. HCM06/10-1SW, HCM06/10-1DW and HCS10-1SW Multi-Location Switches with Scene Capability.
PAGE 15
Residential Grade Home Automation Products DHC Powerline Carrier Receivers DESCRIPTION CAT. NO. O IT M N O EN C M E TA D R Y IVER IT CO 13 1 9 5 M DE HO ® SA ® LM ODU A UN IT OF F E US E CO DE LE SO U N D Y A EL LY LY R N N & O O ER AY ER D N U REL SO Scene-Capable Plug-In Lamp Module with One-Button Programming — Provides 1-button programming through address capturing.
PAGE 16
Residential Grade Home Automation Products DHC Powerline Carrier Receptacle Receivers DESCRIPTION CAT. NO. Split Duplex Wall Receptacle — Equipped with Intellisense (gated automatic gain control). Top outlet provides remote ON/OFF load control in response to controller command signals. Bottom outlet is continuously live. Local control of any light or appliance plugged into the controlled outlet can be achieved by switching the load ON/OFF switch once or twice. Will not respond to ALL LIGHTS ON command.
PAGE 17
Home Automation Products Residential Grade DHC Powerline Carrier Receiver Modules DESCRIPTION CAT. NO. Fixture Relay Module — Can be mounted at either an incandescent or fluorescent fixture by means of adhesive strips. Responds to ON/OFF and ALL LIGHTS ON/ALL OFF commands from controllers. Equipped with leads for easy installation. Rated: 15A 120V 60Hz AC only, incandescent, inductive, or resistive.
PAGE 18
Home Automation Products Residential Grade DHC Powerline Carrier Couplers and Filters DESCRIPTION CAT. NO. Noise Block — The 6287 is designed for use with DHC switch modules that include a means for connection to neutral. This device may be wired on the LOAD side of a DHC switch module (except 6383), or on the LINE side of any fixture using an electronic ballast, a low-voltage ballast, or any noise-generating source that does not require more than 5A 120V AC.