Owner`s manual

TV, VCR, CBL, AUX1, AUX2, SAT
Used to select the device to control. SAT includes DBS
receivers.
0-9
Used as your original remote and to enter device codes.
LAST
Selects the last channel viewed on your TV, VCR, Cable Box or
Satellite Receiver.
CHANNEL +/-
Works like your original remote. Also used to switch modules on
and off.
MUTE
Works the same as your original remote.
VOLUME +/-
Works like your original remote. Also used to brighten and dim
lamps connected to Modules.
TIMER
Used to set the Sleep Timer to automatically switch off the TV
or modules after a preset time.
CAP (CAPTION)
Has different function depending on Mode e.g. TV Closed
Caption in TV Mode.
PLAY, REW, FF, STOP, PAUSE
Work the same as on your original remote.
REC
Record button. Works the same as your original remote. You
must press the REC button twice to begin recording.
SHIFT
For accessing additional functions.
DISP (DISPLAY)
Used to access on-screen information
7
NOTES:
If your audio/video component does not respond, try the
other codes for your brand. If it still doesn’t respond, try the
Code Search using the following method.
If the LED blinked rapidly when you entered the code, you
may have entered an invalid code. Recheck the code in the
code list (separate sheet) and try again.
SEARCHING FOR CODES
1. Turn on the device you want to control.
2. Press and hold SETUP until the LED indicator
lights steadily. Release Setup button.
3. Press the mode button that matches the
equipment you want to control. The LED blinks
once.
4. Press CHANNEL + repeatedly* until the device
to be controlled changes channel.
If you accidentally go past the code, press
CHANNEL - repeatedly until the channel
changes again.
5. Press and release the ENTER button to
complete the setup.
*NOTE: You might have to press CHANNEL+ many
times (50+). If the device does not have a Channel Up
function, use the PLAY button (VCR only) or the POWER button.
10
DI-000-HCCUR-00A-prnspd 8/9/02, 10:16 AM7