Owner`s manual

GETTING STARTED
6-IN-1 REMOTE
The 6-in-1 Remote lets you control practically everything
electrical in your home. It has IR technology that lets you
control all your TV, VCR, Cable and Satellite equipment, and
RF technology that lets you control lamps and appliances
anywhere in your home.
To find out more about configuring the Remote to work with
your audio/video equipment, refer to the following section
titled “Setting Up Your Remote.”
1. Push the tab and lift off the battery cover.
2. Fit two AAA batteries, taking care to match
the + and - marks in the battery
compartment.
SETTING UP
YOUR REMOTE
BUTTON DESCRIPTIONS
INDICATOR LIGHT
The indicator light flashes when the remote is operating.
POWER
Works in the same way as your original remote.
SET UP
Used for programming the remote.
HOUSE SYMBOL
Lets you control modules to operate lamps and appliances
around the home.
6
IDENTIFYING CODES FOUND USING THE SEARCH PROCEDURE
1. Press and hold the SETUP until the LED
indicator lights steadily. Release Setup button.
2. Press the mode button that matches the
equipment you want to identify. The LED blinks
once.
3. Press and release SETUP. The LED blinks once.
4. To find the first digit, press each number button
from 0 to 9 until the LED blinks. The number you
pressed is the first digit of the code.
5. Press each number button from 0 to 9 again as
above to find the second digit.
6. Press each number button in turn to find the
third digit. When the third digit has been found,
the LED goes out.
11
DI-000-HCCUR-00A-prnspd 8/9/02, 10:16 AM6