Owner`s manual

CONTENTS
INTRODUCTION ....................................................................... 5
G
ETTING STARTED ................................................................... 6
6-
IN-1 REMOTE ...................................................................... 6
S
ETTING UP YOUR REMOTE ........................................................ 6
B
UTTON DESCRIPTIONS ............................................................. 6
S
ETTING UP FOR TV, VCR,
C
ABLE BOX AND SATELLITE RECEIVER .......................................... 8
U
SING AUX TO CONTROL
A
SECOND TV, VCR, CABLE BOX OR SATELLITE RECEIVER.............. 9
S
EARCHING FOR CODES ........................................................ 10
I
DENTIFYING CODES FOUND USING
THE
SEARCH PROCEDURE ........................................................ 11
S
ETTING THE TV SLEEP TIMER ................................................... 12
C
ONTROLLING MODULES ....................................................... 12
T
O SET THE HC SLEEP TIMER ................................................... 13
C
HANGING THE HOUSE CODE: ............................................... 14
T
ROUBLESHOOTING ................................................................ 15
W
ARRANTY ......................................................................... 16
4
HOME CONTROL FUNCTIONS:
On: CHANNEL +
Off: CHANNEL –
Bright: VOLUME +
Dim: VOLUME –
All Lamps On: POWER
All Modules Off: MUTE
NOTE: You cannot dim or brighten an Appliance Module. If the
module was off and you press Bright or Dim (VOLUME+ or VOLUME-)
this will simply turn the module on.
TO SET THE HOME CONTROL (HC) SLEEP TIMER
The Sleep Timer switches off the chosen modules after the
preset time.
1. Press and release the button with the House
symbol on it.
2. Press and hold TIMER until the LED indicator
lights steadily. Release the TIMER button.
3. Use the number buttons to enter the module
Unit Code for the module to be turned off.
4. Press the desired function button (e.g.
CHANNEL - to turn the module off after the
preset time).
5. Using the number buttons enter the sleep time
required (1 to 99 mins). Minutes less than 10
should be entered as follows:
01, 02, 03...09.
13
DI-000-HCCUR-00A-prnspd 8/9/02, 10:16 AM4