Specifications

26
MICROLERT STATUS LED LIGHTS
SPECIFICATIONS
ORDERING INFORMATION
Using the versatile MicroLert LED warning lights, it's possible to
assemble a Status Light Assembly suitable for a wide variety of
status monitoring applications.
A typical application is the living quarters of an Oil Platform with
a MicroLert LED Status Light installed to monitor gas detection
equipment. One assembly does it all from a flashing red light to a
steady burn green light with other colors in between either flashing
or steady burning depending on the conditions monitored.
The MicroLert LED Status Light is actually an "A-La-Carte"
monitoring assembly with which the user specifies the model
number and location of each MicroLert mounted on the NEMA 3R
box from two to five lights. For example if a three light assembly is
needed, rst select the NEMA 3R box, then the LED MicroLert
Lights from left to right and Maxi-Signal will assemble them as
specified.
Example Below: 3 Light LED MicroLert Status Light
3-Box 3 Light NEMA 3R pre-punched box
295LF-120-R 120 AC 1/2" Male Thread flashing
295LF-120-G 120 AC 1/2" Male Thread flashing
295LS-120-A 120 AC 1/2" Male Thread Steady-on
295LF-120-240 120/240 AC 1/2" Male Flashing
295LS-120-240 120/240 AC 1/2" Male Steady Burn
295LF-1280 12-80 DC 1/2" Male Flashing
295LS-1280 12-80 DC 1/2" Male Steady Burn
2-Box 2 Light NEMA 3R Box
3-Box 3 Light NEMA 3R Box
4-Box 4 Light NEMA 3R Box
5-Box 5 Light NEMA 3R Box
Specify MicroLert Model Numbers, Lens colors and location on the
NEMA 3 box from left to right.
• Tough Lexan Lens spun welded to the base to
completely seal out moisture. NEMA 4X
• UL Listed with wide voltage range: 85-265 AC,
10-100 DC, DC models also include16-36 AC.
• 5 LED colors: Red, Amber, Blue, Green or White.
• Steady burn or ashing.
• 24 DC = 198 mA, 120 AC = 40 mA
• MicroLert Size: 3" diameter X 2 1/2" High.
• Nema 3R Box sizes:
2-Box = 4" X 4" X 12" 4-Box = 4" X 4" X 24"
3-Box = 4" X 4" X 12" 5-Box = 4" X 4" X 24"
144534_Body r7.indd 26 11/8/11 1:54 PM