Owner's Manual

Note: If a component fails to turn off after you have entered all of the code

numbers listed for your brand, you can scan through the other brands in the

table using the UP and DOWN buttons (there is a chance that your

component was actually manufactured by another brand). However, most of

the code tables are so large it is usually faster to use the Learning Method on

Page 9.

When the component turns off, save the code number you entered

by pressing the SAVE button that appears on the screen.

Exit SETUP mode by pressing the MAIN button two times. When

the display shows “MAIN”, you are back in normal operating

mode.

SAVE

Button

Code

Number

You

Entered

MAIN

Button

The MX-350

Scan Up to the next Code

Number

Scan Down to the previous

Code Number

Press Power On or Power

Off to test if the device

powers off.