Owner’s Manual
Thank You! Thank you for purchasing the MX-350 TM Pre-Programmed and Learning Remote Control. This manual is designed to assist you step-by-step as you setup the MX-350 to replace all of your remote controls and automate your home entertainment system. MX-350 Owner’s Manual © 2004 Universal Remote Control, Inc. The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc.
Table of Contents Getting Started 2 Button Layout 3 Basic Setup 5 Pre-Programmed Method 5 Learning Method 9 Volume Control Punch Through 12 Advanced Operation 14 Advanced Setup 16 Editing Button Labels 16 Macro Button Setup 19 Favorite Channel Setup 21 Hiding and Adding Pages 23 Erasing 25 Cloning One MX-350-NPK-NPK to Another 26 Recalling Pre-Programmed Settings 27 Utilizing Optional RF Base Stations 28 IR/RF Signal Setting 31 ID # - Setting Base Station Address 33 EMITT
The MX-350 Getting Started Congratulations! You’ve purchased one of the most advanced and easy to setup control systems available. The MX-350’s built-in library includes thousands of different brands and models of remote controls. In most systems, all you have to do to setup the MX-350 is enter which brands and models you own. If you own a component too new to be in the library, the MX-350 uses advanced learning technology to quickly set each MX-350 button, one at at time.
Universal Remote Control, Inc. Button Layout Transmitting “Busy” Signal Indicator* TITLE FAVORITE CHANNEL Button LIGHT Button PAGE Buttons change the page of Display Buttons. Screen Labeled Display Buttons PAGE Numbers MAIN Button takes you to the MAIN Menu. FUNCTION Buttons *Note: When a command, macro or favorite channel is being transmitted, an icon will appear in the top right corner of the display. While the MX-350 is “busy”, it will ignore a button push.
The MX-350 Selecting a New DEVICE Changes All Button Commands Instantly The MX-350 can operate ten different devices even though it is only one remote control. Let’s try it now! Press the MAIN button, then press the TV DEVICE button. TV DEVICE Button MAIN Button The top of the screen changes from MAIN to TV. Now all of the buttons change their function to operate a TV. Press the page buttons. Watch the labels of the display buttons change with each press.
Universal Remote Control, Inc. Basic Setup You can start setting up your MX-350 using either the Pre-Programmed Method or the Learning Method. However, all the buttons of the MX-350 are setup at once with the Pre-Programmed Method, so it is usually faster than the one-button-at-a-time Learning Method. Pre-Programmed Method 1 Power on the A/V component you wish to setup, so that you can test codes by sending power off commands.
The MX-350 4 Press the P-PRO button to select the Pre-Programmed Method. P-PRO Button The display changes so that you can select which Device button to setup. First Five Device Names Press a Page button to display the other five Device names. 5 In this step you choose the name of the device you’d like to setup. Use the cursor UP or DOWN buttons to change the flashing name. When it is correct, press the SELECT button.
Universal Remote Control, Inc. 6 In this step you verify the type of component you plan to operate with this device button. If the flashing name is correct, press SELECT. SELECT If the name flashing in the display is incorrect (for example, you are setting up AUX to operate a Laser Disc Player), use the UP and DOWN buttons to change the flashing name to the correct type of component. Note: Each name that appears in the display may include several types of components.
The MX-350 Note: If a component fails to turn off after you have entered all of the code numbers listed for your brand, you can scan through the other brands in the table using the UP and DOWN buttons (there is a chance that your component was actually manufactured by another brand). However, most of the code tables are so large it is usually faster to use the Learning Method on Page 9.
Universal Remote Control, Inc. 10 Repeat steps one through nine for each of your devices. If you are missing any commands, use the learning method, described next Learning Method The MX-350 can learn commands from your old remote controls one-button-at-a-time by following these simple steps: 1 Line-up the MX-350 with your old remote control, head-to-head, one or two inches apart. 2 On the MX-350, press and hold the MAIN and ENT (Enter) buttons at the same time for approximately three seconds.
The MX-350 4 The display will show a list of the first five devices. 5 Select the device you would like to teach commands to by pressing the Device button. Press any of the Device Buttons. 6 Now, press any button you want to teach a command to. Press any Button. Note: If you don’t see the display button you would like to teach, use the PAGE buttons. The only buttons you can’t teach are the PAGE and MAIN buttons. Once you press a button, the top of the display will change from “LEARN” to “READY”.
Universal Remote Control, Inc. 7 Press and hold the button you want on your old remote control until the display changes to either “GOOD” or “FAILED”. If the “GOOD” label appears on top of the display, you were successful. Now, press the next button you wish to teach. Keep repeating steps 6 through 7 until you have learned all the buttons you want. If the “FAILED” label appears on top of the display, try to teach the same button in MX-350 once again by repeating steps 6-7.
The MX-350 Volume Control Punch Through In most home entertainment systems, the sound volume is only controlled by one device. In some systems, it is the TV speakers that make the sound, so you would use the TV device on the MX-350 to raise and lower the volume. In another system, it might be a surround sound receiver and speakers that control the sound, so you would use the MX-350’s AUDIO device to adjust the volume.
Universal Remote Control, Inc. 4 Press the device button for the device that doesn’t have volume control commands yet (i.e.,DVD). This is the device you are going to PUNCH TO for the volume and mute commands. Select the Device you want to “Punch To” Note: If you wish to PUNCH to the MAIN device, press the POWER OFF button at this time. 5 The bottom of the display will then flash “PUNCH FROM”. Now you select the device that has the volume commands you want (i.e.
The MX-350 Advanced Operation Setting Backlight Options You can adjust the amount of time that the MX-350 backlight stays on by entering the SETUP mode and proceeding to page two (using the PAGE UP button), then pressing the LIGHT button on the display (not the Backlight button). Then enter the amount of time you would like the light to stay on using the number pad (0-99 seconds). After making your selection, press the SAVE button.
Universal Remote Control, Inc. Adjusting Contrast You can make the text darker by pressing both the MAIN and cursor UP buttons at the same time. To make the text appear lighter, press both the MAIN and cursor DOWN buttons at the same time. MAIN Button Cursor Up & Down Buttons Contrast set low. Contrast set high. Transmitting (Busy Signal) Icon When a command is being transmitted, an icon will appear in the top right corner of the display.
The MX-350 Advanced Setup After you’ve finished all your basic setup, you can choose to make operation easier by customizing the MX-350 just the way you want, using the Advanced Setup features described in this section. Editing Button Labels You can change the name of any of the display buttons (including Favorite Channels) by following these steps: 1 Press and hold both the MAIN and ENT (Enter) buttons for approximately three seconds. The top of the display will show “SETUP”. You are in SETUP mode now.
Universal Remote Control, Inc. 5 Press the button you wish to edit. The first character of your button label blinks. Blinking Character EDIT flashes at the bottom of the screen. 6 Change the character by using any of the number keys. Each press of the same number button selects the next character of that number’s group, as shown here. A,B,C,1 J,K,L,4 S,T,U,7 D,E,F,2 M,N,O,5 V,W,X,8 G,H,I,3 P,Q,R,6 Y,Z,9 Once the character you want appears, move to the next space by pressing the RIGHT cursor button.
The MX-350 7 When you are finished editing the button, press the button you edited and “SAVED” will flash at the bottom of the display. 8 To change any other button labels on the same device, press the next button, then repeat steps 6-8. If you wish to edit a button on another device, press the MAIN button once, then repeat Steps 4-8. 9 Once you’ve finished editing buttons, press the MAIN button four times to return to normal operation.
Universal Remote Control, Inc. Macro Button Setup Imagine turning on your TV, your DVD player and your surround sound receiver by pressing a single button on your MX-350! What would normally take three remotes and three button pushes, the MX-350 can accomplish with the press of one button. We call that a “Macro”.
The MX-350 5 Navigate to the Device and Page that has a button you want in your macro using the MAIN, DEVICE and PAGE buttons. Then press the button with the command you want. Whenever a button is pressed, another Macro step is counted and displayed at the bottom of the screen. Don’t worry about the number of steps. Each macro button can store up to 190 steps, so you are not likely to run out of steps! Note: You can program delays in between commands by pressing the PAUSE button.
Universal Remote Control, Inc. Favorite Channel Setup Imagine surfing all your favorite channels, without ever typing in a channel number. By simply setting up each of the favorite channel buttons, you can make TV, cable or satellite operation fun and easy. To setup a Favorite Channel button, follow these steps: 1 Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds. Note: You have 30 seconds for each step, otherwise the MX-350 will time out automatically.
The MX-350 Note: If a number is repeated when setting the channel (for example,channel “33” or “522”) it is usually best to set a half second delay in between the identical numbers by pressing the PAUSE button. Each press of the PAUSE button increases the delay by a half second. Use the PAUSE Button to set delays between steps, each press of the pause button increases the delay by a half second. 7 Press the LIGHT button after you enter the channel number.
Universal Remote Control, Inc. Hiding and Adding Pages Each of your MX-350 Devices contains up to eight pages (if a page has no IR data, it will be HIDDEN). However, you can HIDE any page from the users view. A hidden page still appears in SETUP modes, so can be used in macros. If you change your mind and would like the user to see a hidden page, you can ADD them.
The MX-350 4 Navigate to any page, using the MAIN, DEVICE, FAV, and PAGE buttons. FAV Button DEVICE Buttons PAGE Buttons MAIN Button 5 When you select a page, the top of the screen indicates whether you want to “ADD?” or “HIDE?” the page displayed. When you would like to change a page’s visibility, press the LIGHT button. This page is hidden. To ADD it, press the LIGHT button. This page is visible. To HIDE it, press the LIGHT button.
Universal Remote Control, Inc. Erasing You can erase an individual button with a learned command, a macro or a favorite channel. You can erase an entire Device’s learned command or macro buttons. You can also erase ALL your learned commands on all devices or all your macros or favorite channels everywhere. If you really want a fresh start, it is possible to reset everything to the factory default condition.
The MX-350 Erasing the Entire MX-350 To erase EVERYTHING, press and hold both the MAIN and the STOP buttons for 15 seconds. After 15 seconds, the RESET screen appears. Press the SURE button to erase all of your settings and return to the factory default setup. SURE Button Cloning One MX-350 to Another If you own two or more MX-350, you can copy and transfer all the setup from one MX-350 to another.
Universal Remote Control, Inc. Recalling Pre-Programmed Settings If you didn’t write down the code numbers you setup your MX-350 with, you can recall them via this simple process: 1 Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds. Note: You have 30 seconds for each step, otherwise the MX-350 will time out automatically. 2 Go to page two of the SETUP menu via the PAGE UP button. 3 Press the RECAL button. The display changes to the recall screens.
The MX-350 Utilizing Optional RF Base Stations You can use the MX-350 as you would your other remote controls. It transmits very powerful line-of-sight output using infrared light commands (invisible to the naked eye). When you point the MX-350 at the components, expect the range to be between 30 and 50 feet. When the remote is not pointed in the general direction of the components, the range will vary (depending on reflective surfaces, lighting, etc.).
Universal Remote Control, Inc. The MX-350 sends radio signal to the MRF-100, MRF-250 or the MRF-350 RF Base Stations. The RF Base Station converts radio signals to standard infrared commands and sends them out via a built-in front blaster to components in the same cabinet space. Self-adhesive “flashers” (included with the MRF-250 or the MRF-350) affix to the front panels of your components. The flashers relay infrared commands to components out-of-sight of the front blaster.
The MX-350 RF Settings Overview The MX-350 is factory set to work out of the box with an MRF-100 base station, which is not addressable. The only setting that affects operation with an MRF-100 is the RF/IR setting (to operate, the MX-350 must be set to IR/RF or RF- it will not operate the MRF-100 in IR mode). The MX-350 will operate with an MRF-250 or MRF-350 base station set to ID#0 with the factory default settings.
Universal Remote Control, Inc. 3 Press the RF button. RF Button 4 The RF Settings Menu appears. See the notes on the following pages for more info on each option. Make your selection by pressing the button you want: Signal (IR, RF or Both) Base Station ID # Emitters - ALL or a specific Emitter Blaster - Turn the Blaster On or Off Exit this Menu 5 After you’ve made a new setting and SAVED your change, use the EXIT button to return to the RF settings menu to change any other setting.
The MX-350 1 From the RF Settings Menu, select IR/RF. 2 Decide whether you are changing the Signal for all devices or just one of the devices of the MX-350. Select ALL to change the signal settings to ALL devices in the MX-350. Then, go to Step 4. Select DEVIC to change the signal settings to just one of the devices in the MX-350. Then, go to Step 3. 3 The display changes to a list of the names of your devices.
Universal Remote Control, Inc. ID # - Setting Base Station Address When you are installing a system within 100 feet of another equipment location in the same home OR near a home, condo, yacht or motor home that might potentially have an RF remote control of any kind, it is recommended that you use an addressable base station and set the address as described here. You can operate up to 15 different equipment locations, each with an MRF-250 or MRF-350 assigned a unique Receiver ID#.
The MX-350 4 Select the new setting by pressing the desired button, then press SAVE to save your new setting and return to the RF settings menu. Displays the current ID# Change the ID# to a higher number Change the ID# to a lower number Save the new setting Exit this Menu without changing the IR/RF settings EMITT - Setting IR Emitter Outputs The MRF-250 and MRF-350 Base Stations enable you to route or steer the IR commands from any Device to any or all of the IR Line Outputs.
Universal Remote Control, Inc. 3 The display changes to a list of the names of your devices. If you have two pages of devices, pressing either of the page buttons will display the other page. Select the device you would like to change the Emitter settings, then go to Step 4. Page Buttons display the other page of devices. 4 Select a device Select the new setting by pressing the desired button, then press SAVE to save your new setting and return to the RF settings menu.
The MX-350 1 From the RF Settings Menu, select BLAST. 2 Decide whether you are changing the Blaster for all devices or just one of the devices of the MX-350. Select ALL to change the blaster settings to ALL devices in the MX-350. Then, go to Step 4. Select DEVIC to change the blaster settings to just one of the devices in the MX-350. Then, go to Step 3. 3 The display changes to a list of the names of your devices.
Universal Remote Control, Inc. Pre-Programmed Code Tables The MX-350’s Pre-Programmed code library is divided into categories (TV, VCR, AUX, etc.). Each category actually includes many types of components. For example, the VCR category includes TV/VCR combo units. Within each category, the code numbers are listed in rows by brand (Sony, Panasonic, B & K, etc.). Some brands have more than one three digit code for you to try.
TV - TVs, Plasmas, Projectors and Monitors BRAND CODE NUMBERS ADMIRAL ADVENT AKAI AMARK AMPRO AMSTRAD ANAM AOC APEX DIGITAL AQUAVISION ASTAR AUDIOVOX AVENTURA AVIELO AVION BENQ BLAUPUNKT BOXLIGHT CAIRN CANDLE CAPEHART CETRONIC CITIZEN CLASSIC COBY CONCERTO CONTEC CORONADO CRAIG CROWN CURTIS MATHES CXC DAEWOO DAYTRON DELL DIBOSS DIGITAL PROJECTION DREAMVISION DURABRAND DWIN DYNASTY DYNATECH DYNEX EIKI ELECTROGRAPH ELECTROHOME ELEMENT EMERSON 072 081 161 160 247 388 474 475 404 405 458 473 197 146 248 615
TV (continued) - TVs, Plasmas, Projectors and Monitors BRAND CODE NUMBERS GE GEM GOLDSTAR GRUNDIG HAIER HALL MARK HANNSPREE HISENSE HITACHI 197 008 009 034 056 073 074 130 144 155 160 161 165 004 091 157 183 391 004 102 106 112 113 116 119 127 143 220 083 502 501 004 381 419 442 554 411 460 380 004 009 010 011 012 023 075 143 158 163 166 072 221 250 586 587 589 613 614 HP 421 316 327 378 379 481 HUMAX 518 HYPERION 609 HYUNDAI 337 338 ILO 472 INFINITY 164 INFOCUS 230 330 331 332 333 252 409 449 470 531 53
TV (continued) - TVs, Plasmas, Projectors and Monitors BRAND CODE NUMBERS OLEVIA ONKING ONWA OPTOMA OPTONICA ORION PANASONIC PHILCO PHILIPS 432 376 394 504 043 043 360 553 249 265 270 019 081 096 552 524 429 430 034 056 080 092 164 208 261 359 377 583 607 197 003 024 056 059 060 063 064 164 004 551 431 424 425 197 003 004 005 038 059 093 161 164 127 184 206 259 260 264 274 294 594 PHILIPS/MAGNAVOX 260 294 PIONEER 520 438 447 459 385 393 397 197 018 023 025 116 135 190 203 204 209 234 237 334 335 336 533
TV (continued) - TVs, Plasmas, Projectors and Monitors BRAND CODE NUMBERS SYLVANIA SYMPHONIC SYNTAX OLEVIA TANDY TATUNG TCL TECHNICS TECHVIEW TECHWOOD TEKNIKA TELEFUNKEN TELERENT TERA THOMPSON TMK TOSHIBA 514 401 469 197 003 059 060 063 064 164 044 160 127 052 593 052 401 376 394 432 504 081 056 062 426 034 080 557 004 002 003 004 024 028 043 072 101 143 037 046 086 087 615 072 172 215 004 480 455 456 465 007 015 030 040 062 101 138 216 287 290 291 230 288 289 292 293 315 237 325 382 479 TOTEVISION 143 T
CABLE (continued) - Cable Set Top Boxes BRAND BELL SOUTH BLUE RIDGE BRESNAN BUCKEYE COMM C&M CABLEVISION CE-LABS CENTURION CENTURY CHARTER CISCO CITIZEN CJ COGECO COMBANO COMCAST COMSAT COMTRONICS COX DIGITAL CABLE DIGEO DIGICABLE DREAM EAGLE EASTERN ELECTRICORD ENTONE EVOLUTION FTA FOXTEL GEMINI GE GENERAL INSTRUMENT GNC GOLDEN CHANNEL HAMLIN HCN HITACHI INSIGHT JERROLD KCTVJEJU KT M-NET MAGNAVOX MASSILLON MEDIA ONE MEDICOM MEMOREX MOTOROLA MOVIE TIME MOXI NCTC NOVAPLEX NOW TV NSC CODE NUMBERS 099 043 074
CABLE (continued) - Cable Set Top Boxes BRAND OAK PACE PANASONIC PARAGON PHILIPS PIONEER PRUCER PTS PULSAR QUEST RCA RCN RECOTON REGAL REGENCY RODGERS SAMSUNG SCIENTIFIC ATLANTA SEREN SERVICE ELECTRIC SHAW SIGECOM SIGNAL SIGNATURE SK BROADBAND SL MARX SONY SPRUCER STARCOM STARGATE SUSQUEHANNA TADIRAN TBROAD TIMELESS TIME WARNER TOCOM TOSHIBA UNIKA UNITED CABLE UNIVERSAL VIDEOTRON VIEWSTAR VERIZON WIDE OPEN WEST ZENITH CODE NUMBERS 031 037 053 043 074 113 044 047 052 006 012 013 020 085 103 034 051 063 076
DVD - DVD Players BRAND ADCOM ALPINE AKAI APEX DIGITAL ARCAM AUDIOVOX AYRE CALIFORNIA AUDIO CAMBRIDGE AUDIO CARY AUDIO DESIGN CLASSE COBY CYBERHOME DENON DP-1 DURABRAND EMERSON ESA GATEWAY GE GRADIENTE GRUNDIG GO VIDEO HARMAN KARDON HITACHI FUNAI ILO INSIGNIA INTEGRA JVC KENWOOD KISS KLH KRELL LECSON LEXICON LG LINN LITEON MAGNAVOX MALATA MARANTZ MCINTOSH MEMOREX MERIDIAN MINTEK MITSUBISHI MYRYAD NAD NAKAMICHI ONKYO OPPO PANASONIC PARASOUND CODE NUMBERS 157 098 281 111 112 115 116 236 122 284 339 021 124 2
DVD (continued) - DVD Players BRAND PHILIPS PIONEER POLKAUDIO POLAROID PRIMARE PROCEED PROSCAN RCA RJTECH ROTEL SAMSUNG SANSUI SANYO SENSORY SCIENCE SHARP SHERWOOD SONY SPECTRONIQ SUPERSCAN SV2000 SYLVANIA SYMPHONIC TAG MCLAREN TEAC THOMPSON THULE TOSHIBA TRUTECH VENTURER VINC YAMAHA ZENITH CODE NUMBERS 317 276 277 066 095 105 166 176 344 303 304 305 172 213 283 092 099 107 108 131 162 337 083 235 236 237 284 295 296 297 193 194 086 026 027 290 307 026 027 273 269 335 336 275 301 200 056 070 119 137 159 16
DVD -TV/DVD/VCR Combos BRAND DURABRAND EMERSON ESA INSIGNIA MAGNAVOX PANASONIC POLAROID SYLVANIA SYMPHONIC TOSHIBA CODE NUMBERS 143 143 143 143 143 144 205 235 143 143 164 298 DVD - DVD/VCR Combos BRAND GO VIDEO PANASONIC PHILIPS SAMSUNG SANSUI TOSHIBA ZENITH CODE NUMBERS 137 150 105 (VCR Functions for VCR 067) 137 159 154 141 187 214 091 182 DVD - DVD Recorders BRAND CYBERHOME GATEWAY GO VIDEO ILO KISS LITEON LG ONKYO PANASONIC PHILIPS PIONEER SAMSUNG SENSORY SCIENCE SONY TOSHIBA ZENITH CODE NUMBERS 2
DVD(continued) - Laser Disc Players BRAND MITSUBISHI NAD OPTIMUS PANASONIC PHILIPS PIONEER RADIO SHACK RCA REALISTIC RUNCO SANYO SHARP SONY TECHNICS THETA DIGITAL TOSHIBA YAMAHA CODE NUMBERS 121 121 049 013 113 032 106 117 121 120 002 049 127 075 152 013 053 110 113 032 152 106 043 129 VCR - VCRs BRAND AIWA AKAI AMPRO ANAM AUDIO DYNAMICS BROOKSONIC CANON CAPEHART CRAIG CURTIS MATHES DAEWOO DAYTRON DBX DYNATECH ELECTROHOME EMERSON FISHER FUNAI GE GO VIDEO GOLDSTAR HARMAN KARDON HITACHI INSTANTREPLAY JCL JC
VCR (continued) - VCRs BRAND MARANTZ MARTA MATSUI MEI MEMOREX MGA MINOLTA MITSUBISHI MTC MULTITECH NEC NORDMENDE OPTONICA ORION PANASONIC PENTAX PHILCO PHILIPS PILOT PIONEER PORTLAND PULSAR QUARTZ QUASAR RADIO SHACK RCA REALISTIC RICO SALORA SAMSUNG SANSUI SANYO SCOTT SEARS SHARP SHINTOM SIGNATURE SONY SOUNDESIGN STS SYLVANIA SYMPHONIC TANDY TATUNG TEAC TECHNICS TEKNIKA THOMAS TMK TOSHIBA TOTEVISION UNITECH VECTOR RESEARCH VICTOR VIDEO CONCEPTS VIDEOSONIC CODE NUMBERS 012 031 067 069 101 027 030 031 003 01
VCR (continued) - VCRs BRAND WARDS YAMAHA ZENITH CODE NUMBERS 003 013 017 024 031 034 040 053 054 131 012 034 039 043 034 048 056 058 072 080 101 VCR - TV/VCR Combos BRAND DAEWOO FUNAI GOLDSTAR HITACHI JCPENNEY LG LLOYD MAGNAVOX MEMOREX PANASONIC PHILIPS RADIO SHACK RCA SEARS SONY SYLVANIA SYMPHONIC THOMAS ZENITH CODE NUMBERS 005 117 034 101 123 034 101 101 123 034 034 067 101 070 034 067 123 034 101 057 067 034 034 034 AUDIO - Amps, Preamps and A/V Receivers BRAND ADC ADCOM AIWA AMC AMEND ANTHEM ARAGON
AUDIO (continued) - Amps, Preamps and A/V Receivers BRAND CODE NUMBERS CAMBRIDGE AUDIO CARVER CARY AUDIO DESIGN CASIO CINEMA SOUND CLASSE CLARION COLORADO VNET CURTIS MATHES DELPHI DENON 522 523 524 525 630 683 684 552 006 027 028 061 071 022 029 077 757 759 443 519 076 034 537 410 411 484 026 539 076 415 515 614 811 812 814 816 818 819 820 821 822 002 034 027 037 259 340 349 400 402 422 564 601 602 649 678 679 700 809 810 112 EAD 099 098 ELAN 057 290 468 469 470 471 472 481 482 483 508 509 ESCIENT 368 3
AUDIO (continued) - Amps, Preamps and A/V Receivers BRAND CODE NUMBERS NETSTREAMS NEXUS AUDIO NHT NILES NIRO NUFORCE NUVO OLIVE ONKYO 616 620 749 750 751 691 403 100 343 766 404 405 606 607 608 609 610 584 781 782 784 017 046 064 079 080 090 275 438 439 440 441 442 486 536 552 586 629 786 OPTIMUS 026 041 OUTLAW 342 PANASONIC 797 798 032 292 383 516 626 627 PARASOUND 553 294 295 333 334 PASS LABS 431 PEACHTREE 106 PHILIPS 690 063 296 104 PIONEER 823 827 828 545 546 556 014 033 039 044 045 050 069 035 078
AUDIO (continued) - Amps, Preamps and A/V Receivers BRAND CODE NUMBERS XM SATELLITE RADIO 614 415 514 515 556 YAMAHA 831 026 067 264 089 332 373 427 428 432 434 436 540 541 557 558 561 565 566 581 583 599 600 643 644 655 661 662 663 664 665 667 668 669 676 711 715 717 720 461 740 752 753 897 102 YBA 485 ZON 587 AUDIO - XM Radios & Tuners BRAND ARCAM DELPHI FANFARE KENWOOD MYRYAD NAIM NUVO MUSICAL FIDELITY PIONEER POLKAUDIO PRIMARE RUSSOUND SIRIUS SONY XM SATELLITE RADIO CODE NUMBERS 504 591 415 515 352
SAT (continued) - Satellite Receivers BRAND FORTEC STAR FUJITSU GE GENERAL INSTRUMENT GOI HITACHI HIRSCHMANN HOME CABLE HOUSTON TRACKER HTS HUGHES HYTEK HYUNDAI ICR JANIEL JERROLD JVC KATHREIN KPN LEGEND LG LUXOR MACOM MARANTZ MEMOREX MICRONIK MULTIMEDIA MITSUBISHI MOTOROLA NEXT LEVEL NEXTWAVE NFUSION NORSAT NTL NV PACE PANASONIC PANSAT PERSONAL CABLE PHILIPS PL PRESIDENT PRIMESTAR PROSAT PROSCAN RADIOSHACK RCA REALISTIC SAB SAMSUNG SATCRUISER SATELLITE SERVICE SKY SKYLIFE SONY STARCAST STAR CHOICE CODE NU
SAT (continued) - Satellite Receivers BRAND SUPERGUIDE TEECOM TOSHIBA TOWN & COUNTRY UNIDEN VIEWSTAR VOOM WINEGARD ZENITH CODE NUMBERS 020 124 125 023 026 075 087 088 090 107 130 137 002 127 157 158 068 154 023 026 016 025 042 043 044 045 048 049 078 079 080 086 101 135 136 115 148 128 146 081 082 083 084 091 120 159 CD - CD Players and Changers BRAND ADCOM AIWA AKAI AMC AMEND ARCAM AUDIO ACCESS AUDIO EASE AUDIO TECHNICA BEL CANTO BSR CALIFORNIA AUDIO CAMBRIDGE AUDIO CAPETRONIC CARRERA CARVER CASIO CARY A
CD (continued) - CD Players and Changers BRAND KYOCERA LINN LOTTE LUXMAN LXI MAGNAVOX MARANTZ MCINTOSH MCS MEMOREX MISSION MITSUBISHI MITSUMI MODULAIRE MONDIAL MUSICAL FIDELITY MYRYAD NAD NAKAMICHI NEC NIKKO NSM ONKYO OPTIMUS PANASONIC PARASOUND PHILIPS PIONEER PLINIUS PRIMARE PROCEED PROTON QUAD QUASAR RADIO SHACK RCA REALISTIC ROTEL SAE SANSUI SANYO SCOTT SHARP SHERWOOD SIGNATURE SIMAUDIO SONY SOUNDESIGN SUGDEN SUMO SYLVANIA SYMPHONIC TAEKWANG TANDY TEAC TECHNICS CODE NUMBERS 005 295 102 011 028 070 076
CD (continued) - CD Players and Changers BRAND CODE NUMBERS TECHWOOD THETA DIGITAL TOSHIBA VECTOR RESEARCH VICTOR WARDS YAMAHA YORX 076 234 235 270 006 067 091 160 148 080 004 022 114 124 185 033 024 046 054 186 183 236 282 283 287 182 DVR - Digital Video Recorders (TiVo, Replay) BRAND CODE NUMBERS DIRECTV DSTV HUGHES HUMAX ICREALTIME MOXI PHILIPS PIONEER RCA REPLAY TV SONY SPECO CO TECHNOLOGIES TECHNOL TIVO 117 121 122 123 124 125 126 127 128 136 117 121 122 123 124 125 126 127 128 118 121 122 123 1
AUX (continued) - Custom Installation Products BRAND CODE NUMBERS DCS DDI DELL DENON DIGITAL STREAM DLINK DLO DMX DRAPER SCREEN DREAMVISION DVDO DWIN ELAN 468 469 470 403 261 559 609 435 479 418 156 204 097 299 423 576 577 080 451 452 453 454 455 456 457 458 441 442 443 444 445 446 447 448 449 521 522 538 541 542 543 544 545 546 547 548 ELECTROKINETICS 438 ELGATO 478 ELITE SCREENS 431 432 EVERQUEST 206 EXTRON 151 433 FARENHEIT 430 FAROUDJA 184 FOCAL 436 FUJI 209 FUZE MEDIA SYSTEMS 558 GATEWAY 261 GRIDLIN
AUX (continued) - Custom Installation Products BRAND CODE NUMBERS MICROSOFT MINDPATH NEOPRO NETGEAR NEXUS21 NILES NSM NTI NYKO ONKYO OMNIMOUNT OPTIMA PEERLESS PHILCO PIANO DISC PINNACLE POLKAUDIO POLYCOM PRIMARE PSYCLONE RCA REQUEST ROKU RUNCO RUSSOUND SAGETV SANSONIC SCHMARTZ SCIENTIFIC ATLANTA SHERWOOD SIMA SKARDIN SOLO ELECTRONICS SOMFY SONANCE SONY SPEAKERCRAFT STARCOM TEN TECHNOLOGY TIVAX TOUCHSTONE TURBOSCAN VANCO VELODYNE VUDU VUTEC WURLITZER XANTECH 408 481 107 252 261 205 671 477 665 160 187 272
AUX - Media PC Controls BRAND DELL GATEWAY HAUPPAUGE HP KEYSPAN MICROSOFT SONY CODE NUMBERS 261 261 294 295 252 261 297 252 261 261 271 AUX - GAME Systems BRAND CODE NUMBERS MICROSOFT/XBOX 107 408 SONY 414 AUX - iPod Controls BRAND APPLE/iPod BOSE DLO IPORT KENSINGTON SONANCE TEN TECHNOLOGY CODE NUMBERS 401 412 409 418 419 406 419 401 AUX - Tape Decks BRAND AIWA CARVER DENON FISHER GOLDSTAR HARMAN KARDON JVC KENWOOD LINN LUXMAN MAGNAVOX MARANTZ MCINTOSH MITSUBISHI NAD NAKAMICHI ONKYO OPTIMUS PANASONI
AUX (continued) - Tape Decks BRAND SANSUI SHARP SHERWOOD SONY TEAC TECHNICS TOSHIBA VICTOR YAMAHA CODE NUMBERS 027 113 119 224 026 057 131 175 181 038 004 028 030 033 034 020 022 052 084 089 009 059 212 007 010 076 088 109 122 193 112 106 021 026 031 067 040 AUX - Lighting Systems BRAND COLORADO VNET LEVITON LITE TOUCH LIGHTOLIER CONTROLS LUTRON RAKO WATT STOPPER X-10 XANTECH CODE NUMBERS 311 312 321 208 212 307 077 158 159 306 308 309 340 341 301 302 303 304 305 319 320 093 183 257 188 189 60
The MX-350 Frequently Asked Questions What is a “macro” button? It is an MX-350 button you set to make a lot of things happen when you press it. For example, to watch a DVD in most home theaters requires several remote controls and many button presses (power up the TV, power up the surround sound, power up the DVD player, set the TV to the correct video input, set the surround sound to the correct audio input and finally; press play on the DVD player remote control).
Universal Remote Control, Inc. USALimited Warranty Statement Your Universal Remote Control, when delivered to you in new condition, is warranted against defects in materials or workmanship as follows: UNIVERSAL REMOTE CONTROL, INC. warrants this product against defects in material or workmanship for a period of one (1) year and as set forth below.
Universal Remote Control, Inc. LIMITATION OF REMEDIES UNIVERSAL REMOTE CONTROL SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS PRODUCT.
Universal Remote Control, Inc. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
NOTE 65
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 OCE-0024B REV.
