TKP-2000 Network Keypad Owner’s Manual
TKP-2000 Installation Manual ©2011 Universal Remote Control, Inc. The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior notice.
TABLE OF CONTENTS Congratulations! 1 Features and Benefits 2 Parts List 2 TKP-2000 Product Description 3 Displaying the Settings Screen 4 Adjusting Sleep Settings 4 Button Light Settings 4 Setting Date and Time 4 Sound 5 Adjusting Brightness 5 System 5 Network 5 Factory Default 6 Exit 6 Frequently Asked Questions 7 Specifications 7 USA Limited Warranty Statement 8 Federal Communication Commission Interference Statement 10 Regulatory Information to the user 11
TKP-2000 NETWORK KEYPAD Congratulations! You’ve purchased a unique synthesis of hardware and software engineering, the Total Control TKP-2000 Network Keypad. The TKP-2000 achieves a magnificent combination of power and flexibility by simplifying and automating the operation of even the most complex systems. The TKP-2000 has the ability to control audio video components, energy management devices, multi-zone matrixes, PCs, iPods and whole house URC Lighting.
TKP-2000 NETWORK KEYPAD Features and Benefits 2-Way IP Home Theater AVRS Now with the unique URC 2-Way database, you can control your multizone audio video receivers over your home network via the MRX-10 Network System Controller.
TKP-2000 NETWORK KEYPAD TKP-2000 Product Description The TKP-2000 consists of a 3.5” color touchscreen and 6 customizable buttons. Your whole house custom installer can request custom buttons specific to your Total Control setup. Power: Turn on your Total Control setup by pressing the Power button. Lights: Press to control URC Lighting throughout your home. Main: Press to view the main screen and control the Total Control setup. Vol+, Vol- and Mute: Easily adjust the volume settings for any zone.
TKP-2000 NETWORK KEYPAD Displaying the Settings Screen You can adjust the settings of the TKP-2000 whenever you like by pressing and holding both the MAIN and MUTE buttons for five seconds. When you do, the screen will change to the SETTINGS screen. If you do not press any button on the SETTINGS screen within 1 minute, the TKP-2000 will time out and automatically return to normal operation. Adjusting Sleep Settings Conserve energy by configuring the keypad to fall asleep after a specified amount of time.
TKP-2000 NETWORK KEYPAD Sound Your TKP-2000 may have been programmed to make sounds. This is optional, and some professional installers may prefer to keep it silent. However, you can adjust the volume to any level you like by touching and dragging the volume control here. Adjusting Brightness Simply touch and drag the brightness slider to the desired level. System The System Information screen displays data about your TKP-2000’s operating system, memory etc.
TKP-2000 NETWORK KEYPAD Factory Default WARNING! Only use this button when instructed to by Technical Support. It resets the memory of the TKP-2000 to the factory condition. All your programming will be lost! Exit When you have finished adjusting Settings, simply tap the EXIT button to return to normal operation.
TKP-2000 NETWORK KEYPAD Frequently Asked Questions How do I update the firmware? Periodically there will be firmware updates for the TKP-2000. As the TKP-2000 is connected to your home network, your installer has the ability to update the firmware via Off-Site programming. How do I reset a TKP-2000? Remove the front cover of the TKP-2000. Use a pen or pointy device to depress the button and reset the unit.
TKP-2000 NETWORK KEYPAD USA Limited Warranty Statement Your Universal Remote Control, when delivered to you in new condition, is warranted against defects in materials or workmanship as follows: UNIVERSAL REMOTE CONTROL, INC. warrants this product against defects in material or workmanship for a period of one (1) year and as set forth below.
TKP-2000 NETWORK KEYPAD LIMITATION OF REMEDIES UNIVERSAL REMOTE CONTROL SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS PRODUCT.
TKP-2000 NETWORK KEYPAD Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TKP-2000 NETWORK KEYPAD Regulatory Information to the user CE conformity Notice Products with “CE” marking comply EMC Directive 2004/108/EC issued by the commission of the European Community. 1) EMC Directive Emission Immunity Power : EN 55022 : EN 55024 : EN-61000-3-2, 3 Declaration of Conformity “Hereby, Universal Remote Control Inc. declares that this TKP-2000 is in compliance with the Essential requirements and other relevant provisions of EMC Directive 2004/108/EC.” Certification Type No.
TKP-2000 NETWORK KEYPAD Declaration of Conformity Company Name : Universal Remote Control Inc. Company Address : Contact Info rmation : Brand Name : 500Mamaroneck Avenue, Harrison, NY 10528, U.S.A www.universalremote.
NOTE Page 13
NOTE Page 14
NOTE Page 15
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.
