Owner's Manual
Table Of Contents
- Congratulations!
- Using the MX-490
- Accessing the Setup Menu
- Basic Setup
- Advanced Setup
- Copy & Paste
- Macros
- Hide or Display Pages
- Edit Labels
- Erasing
- Macros: One Button
- Macros: One Button - One the Main Menu
- Macros: One Button - Inside a Device
- Macros: All on 1 Device
- Macros: All Everywhere
- Learned Commands: One Button
- Learned Commands: One Button - One the Main Menu
- Learned Commands: One Button - Inside a Device
- Learned Commands: All on 1 Device
- Learned Commands: All Everywhere
- RF Setup
- Favorite Channels
- User Settings
- Display Tips
- Specifications
- Limited Warranty Statement
- Parts List
9
Complete Control
MX-490
Owner’s Manual
Learn: On the Main Menu
This learn method is for adding IR commands to a device on the main menu.
1. Highlight On the Main Menu and select Next.
2. Select the device from the menu. Use Page+ to move between pages.
3. Once selected, the banner will ash “READY” to indicate it is ready to
learn IR commands. Point the other remote directly at the MX-490 and
press a button to learn the IR command.
4. The banner will ash “SAVED” and return to the device menu. A
device with a learned IR command displays an L in a green box.
Repeat this process for each command to be learned. Select Done
to return to the menu.
4
3
1
2