Owner`s manual

70
Type in Section Title
U
S
I
N
G
C
C
P
E
D
I
T
O
R
T
O
P
R
O
G
R
A
M
VS-1006 VOLTAGE POWER SENSOR
The VS-1006 Voltage Power Sensor allows voltage output of a system component to be used to monitor that
component’s ON/OFF status for power management when the device does not have discrete commands or a
composite video output is not available for video sensing. Some components provide 12V Status Outputs
while with other applications, a DC power supply plugged into a component’s switched outlet can be used to
provide device status.
VS-1006 Voltage Power Sensor Features
VS-1006 Voltage Power Sensor
26 Sensor Plug – One four-circuit 3.5 mono mini plug connects to one of the Video or Voltage Sensor
Inputs on the MSC-400 rear panel.
27 Power LED – One red LED illuminates to indicate the VS-1006 is properly connected to and pow-
ered from the MSC-400.
28 Sensed Voltage Input – One two-pin plug-in connector terminal connects to the AC or DC voltage
output of the device being sensed. POLARITY: Not critical on VS-1006 end. RATING: 3-25 V AC or
DC. WIRE GAUGE: Up to 14AWG.
Reference: Features and Parts