Owner`s manual

63
Type in Section Title
M
S
C
4
0
0
M
A
S
T
E
R
S
Y
S
T
E
M
C
O
N
T
R
O
L
L
E
R
12 In the IR Data From field select AUX. In the box directly to the right, enter the Setup Number: 501
for letters or 502 for any special characters that may be desirable for a particular user requirement.
DO NOT make any changes to: Brand, Model or Repeat.
13 Double click on PC page 2 of the Model Designer and select the ’A’ button. Drag the ‘A’ from the
Database window to a simulator button. Adding the function to the button also adds the text. Now,
any time the ‘A’
BUTTON is pressed, the ‘A’
will be issued and the remote ‘keyboard’ will return to
PC page 1 for selection of the next letter. (If the user preference is to navigate the letters manually,
omit the Goto page instructions in Steps 10-11.)
14 Repeat Steps 8-14 for the remaining pages, until all letters and a space command have been added
to the PC device.
15 Save the project and Download to the remote. See Section: Saving and Downloading a CCP Project
for additional information.
NO
TE
-
The Media Server PC must be connected to the USB2 Port on the MSC-400 Rear Panel.
PC Keyboard Emulation