Owner`s manual

Here’s how it looks in the Macro window now:
7 Now let’s take care of the other problem in our macro, the Power On delay for the Audio receiver.
Once again, click on the IF button on the top of the macro window.
8 Drag the Audio power, the Audio input command and the 5 second delay into the If branch.
9 Set the same voltage sensor configuration for the audio receiver as the cable box.
10 To Save, click on file within the CCP MSC editor Menu Bar then select Save.
11 To Test, download the MSC Project to the MSC-400. Also see Section: Programming Smart Macro
Triggers to the Remote.
NOTE – Macro Triggers must be programmed to a remote to test Smart Macros from a remote.
Programming Sensor Triggered Macros - Video and Voltage Sensing
Sensor triggered macros are programmed in mostly the same way as normal macros with one key difference.
In the smart macro window under Macro Trigger Setting
, instead of selecting normal macro (Step 2 in the
System On Macro, Step 2B in the Source Select Macro examples), select Trigger This Macro When , and set
the appropriate configuration from the pull downs. These are the same set-
tings as in the If Else setting window for a normal smart macro, except here,
rather than being initiated by an RF Trigger from a remote button press, when
the specified condition is sensed, the associated macro is executed. This is
extremely effective for video games. When the game turns on, the presence of
the video game composite video signal on a MSC sensor input will trigger the
associated smart macro, i.e.: Turn the system on if off, select the appropriate
sour
ce input for the video game, etc. In addition, one of the sensor inputs will
need to be configured for the sensor of the device triggering the macro. See
section: Properties window for additional information. Otherwise, follow the
steps in System On/Off Macros or Source Select Macros to program a Sensor
Triggered Smart Macro. See Section: Programming Macro Triggers on page 56
for step by step instructions.
Nesting a Smart Macro Alias
This MSC-400 programming feature allows Inserting a Smart Macro within
another Smart Macro as a single line item rather than as individual commands
45
Type in Section Title
M
S
C
4
0
0
M
A
S
T
E
R
S
Y
S
T
E
M
C
O
N
T
R
O
L
L
E
R
Sensor Triggered Macros