Owner`s manual

To program Favorite Channel Macros:
1 In the CCP MSC-400 Editor Menu Bar, click Program, then click Make Smart Macro.
2 Add a New Group named Favorite Channels Cable(Satellite, etc), then add the names for the
Favorite Channel Smart Macros to the list. (HBO, Cinemax, ESPN, etc.) See section: Adding a Macro
Group and Smart Macros for additional information.
3 In MSC Editor Treeview, click the ‘+’ next to Favorite Channels to expand the list.
4 Right click a Smart Macro (HBO). In the pop-ups, highlight Tools, then click Favorite Channel. The
Favorite Channel Tool will appear.
Open Favorite Channel Tool
5 If necessary, select Favorite Channels in the Favorite Channel Tool window via the Macro Group pull
down.
F
a
v
or
ite Channel Tool
6 In the Macros box, click a Favorite Channel Smart Macro. (HBO)
7 In the Selected Macro Block, if necessary, click the Interstep Delay button and set an appropriate
duration for the device being controlled, by either typing a value in the box or using the Up/Down
arro
ws. Some devices may not need a delay but others will be a little slow to process fast sequences
of commands, so a short gap, typically around .3 seconds, between commands is usually a good
idea. Interstep Dela
y Range: .1 to 32.3 seconds.
40
Type in Section Title
U
S
I
N
G
C
C
P
E
D
I
T
O
R
T
O
P
R
O
G
R
A
M
Macro Groups and Smart Macros