Owner`s manual

PRODUCT FEATURES

System Control of up to twelve devices (twenty two in a Master/Slave System)

Power management of up to six devices (twelve in a Master/Slave System)

MSC-400 stores and outputs all system commands and macros eliminating partially executed macros

MSC-400 Outputs IR and RS232 commands

Senses Composite Video and AC or DC voltage for device status

Six Configurable Video or Voltage Sensor inputs

Six dedicated IR Output Ports (twelve in a Master/Slave System)

Six configurable IR or RS232 output Ports (ten in a Master/Slave System)

Rear panel USB Port allows control of a Windows Media Center PC

Remotes can be programmed to emulate Media Center Keyboard for alpha search

IR input for system control via properly programmed and compatible IR remotes and keypads

Narrow-band RFX-250 Sensor filters out interference from remote signals for reliable communication

and control

Up to three RFX-250 Sensors can be connected for extended RF Remote range in large systems

RF Output allows expansion to a second MSC-400 for control of up to 22 devices or connection to a

MRF Series Base Station for control of IR devices located away from the MSC-400

Two internal relays provide additional integration and control of screens, lifts, drapes, amplifiers, etc.

Relays are programmable for Paired Commands, (Normally Open or Normally Closed), Momentary

(Push and Hold) or Timed operation

12 volt ‘convenience’ output provides power supply to internal relays for devices that require voltage

for activation

Programmed with Complete Control Suite

Programmable to output single IR or RS232 commands

Programmable to output Smart Macros of IR and/or RS232 and Relay Commands

Programmable for ‘conditional’ IF/ELSE Smart Macros and Action Variables to output specific com-

mands for specific system settings or user preference

Programmable for Master System ON/OFF macros

Programmable for specific source select settings

Compatible remotes can be programmed with System Status Messages to let the user know when the

MSC-400 is executing Smart Macros and to wait for the macro to execute

What’s Included in the Box

1 – MSC-400 Master System Controller

1 – 12V DC 3.5A Power Supply

1 – RFX-250 RF Sensor

1 – 10’ RFX-250 Connecting Cable

6 – Standard IR Emitters

1 – 3’ USB Programming Cable

Product Features