Quick Reference Guide
The MX-5000 is compable with the ultra-reliable MSC-
400 “Trigger” protocol, which enables complex macros,
stored in the MSC-400, to be individually triggered with
a single buon push on the MX-5000 regardless of the
interference and noise in the environment.
The combinaon of very narrow transmission of digitally
encoded packets sent THREE mes at digital speeds in
milliseconds assures that every buon press on the
remote will be received by the MSC-400. The MSC-400’s
sophiscated error correcon circuitry stores all three
packets and compares them. Once two packets are
idened as idencal, the MSC-400 goes to work.
This new technology not only increases range, but
increases reliability by a vast margin.
MSC-400 Compatibility
MX-5000 is compable with the MSC-400 Master System Controller
Automac Backlighng
The integral moon sensor detects any movement of the touch screen and automacally backlights
the screen. The user does not have to press any buon to display the screen. Any movement of the
MX-5000 renews the backlighng. Without movement, the touch screen stays lit for 1 to 99 seconds
(programmed by the installer).
Not Just Color, Animated Color!
Powered by a 533MHz ARM9 microprocessor, the MX-5000 is designed for animaon. The powerful
central processor enables quick, uid page transions and animated macros.
Learn more. Visit URC at www.universalremote.com or explore URC’s rich learning
opportunies at www.urccontrolroom.com/LP_training/
Double Capacity Lithium Ion Baeries and
Charging Base
The demands of WiFi and high speed transfers coupled with a
large color touch screen raise the demand for power to a new
high. The MX-5000 is equipped with a unique double capacity
Lithium Ion baery, providing over 4 hours of connuous use
before recharging is necessary. Should the MX-5000 be le
on a table, it will remain in standby mode for 9 days without
requiring a recharge.
The aracve charging base oers an ideal angle to use while
charging, so may be placed on or near your chair. In addion,
the MX-5000 oers a power input at the base of the remote,
so that it can be hand held while charging directly from the
power adapter.