Quick Reference Guide
The MRX-1 is a true bridge between the network and
IR, RS-232 and relay-controlled devices. In addion, it
provides 2-way status and feedback via RS-232 and a
voltage/video sensor to network keypads and remotes.
The MRX-1 serves as a “converter” to RS-232 controlled
devices, enabling your MX-5000 to communicate over
the network to an equipment rack located anywhere in
your house. Since the conversion is both ways, your RS-
232 device can be both controlled and can update your
MX-5000 with the current status, and display volume pop
ups, tuner interfaces and lists of AVR radio presets etc. all
on the screen of the MX-5000.
In addion, the MRX-1 provides the MX-5000 with control
over relay and IR controlled devices.
2-Way RS-232 via MRX-1 Network Base Station
Engineered
to delight both the
eye and the hand
The MX-5000’s bright, vivid color
touch screen is mounted in a remote
control where every surface, every
contour, and every buon has been designed
to feel “right.” Since WiFi 2-way delivers so
much more fun, you’ll need twice the baery
life of other products and the MX-5000 delivers it
invisibly, without excess weight or bulk. The weight
is perfectly posioned to balance in your hand.
Contours are shaped and molded into the back so
that your hand can nd the perfect posion. The enre
rear is covered with a so texture that feels perfect
against your palm.
Each MRX-1 controls two 2-Way RS-232 Devices, one relay and up to six IR devices.