MRX-30 Owner’s Manual
Introduction: The MRX-30 Advanced Network System Controller is designed to meet the needs of large residential or small commercial environments. Only Total Control 2.0 software, products, and user interfaces are supported by this device. Features and Benefits: ● Stores and issues commands for all IP, IR, RS-232, Relays, Sensors, and 12V controlled devices. ● Provides two-way communication with Total Control 2.0 user interfaces (remotes and keypads)..
Front Panel Descriptions: The front panel consists of three (3) indicator lights which illuminate during usage: 3. Status Light: Two (2) possible states: 1. Power: Indicates that the MRX-30 is powered when illuminated. ● Status Light On: Connected to LAN and internet. 2. Ethernet: When the device has valid Ethernet connection, the indicator light remains a solid blue. ● Status Light Off: Connected to LAN, no internet or Ethernet cable has been unplugged. 4. Reset: Press once to power cycle the device.
Rear Panel Description: Below are the ports located at the rear of the MRX-30: 1. Relays (NO, NC, or COM): Six (6) programmable relays. 5. LAN: RJ45 10/100/1000 Ethernet port. 2. 12V OUT: Four (4) programmable outputs. Each port may be programmed to turn on, off, or momentarily toggle. 6. IR Outputs: 12 standard 3.5mm IR emitter ports with variable output level adjustment screws 3. Sensors: Six (6) programmable sensor ports, compatible with all URC sensors. 7.
Specifications: Limited Warranty Statement 1. Limited Warranty and Disclaimers Universal Remote Control, Inc.
equipment and/or the URC software fails to so comply, URC shall, at its own expense, take all reasonable measures to promptly cause such to comply. THIS LIMITED WARRANTY DOES NOT COVER TECHNICAL ASSISTANCE FOR HARDWARE OR SOFTWARE USAGE EXCEPT AS EXPRESSLY PROVIDED FOR HEREIN. CERTAIN IMPLIED WARRANTIES, INCLUDING AN IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, MAY BE AVAILABLE WITH RESPECT TO URC EQUIPMENT. IMPLIED WARRANTIES VARY FROM STATE TO STATE.
This limited warranty only covers the URC equipment issues caused by defects in material or workmanship during ordinary consumer use. It does not cover product issues caused by any other reason, including but not limited to product issues due to commercial use, acts of God, third-party installation, misuse, limitations of technology, or modification of or to any part of the URC equipment.
Note : The manufacturer is not responsible for any Radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. End User Agreement: The terms and conditions of the End User Agreement available at https://www.universalremote.com/end-user-agreement/ shall apply.